In memory of Ben “bushing” Byer, who passed away on Monday, February 8th, 2016.

Difference between revisions of "Homebrew setup"

From WiiBrew
Jump to navigation Jump to search
m (Undo revision 120848 by Lesgooooo (talk))
Tag: Undo
 
(214 intermediate revisions by 78 users not shown)
Line 1: Line 1:
−
The easiest way to setup and use Homebrew on your Wii is by using the [[Twilight Hack]] to install the [[Homebrew Channel]].  
+
This is a step-by-step guide of how to install the '''[[Homebrew Channel]]''' on your Wii console. The methods described in this tutorial cover the '''[[Smash Stack]]''', '''[[Yu-Gi-OWNED!]]''', '''[[Bathaxx]]''', '''[[Return of the Jodi]]''', '''[[Indiana Pwns]]''', '''[[Eri HaKawai]]''' and '''[[Wilbrand]]''' exploits as these are the only methods working for 4.3; other methods of installing the Homebrew Channel for users with older System Menus are [[Bannerbomb]] and the [[Twilight Hack]].
  
−
== General information ==
+
This tutorial applies to versions of the Wii System Menu ranging from '''3.0 to 4.3'''. Older Korean Wiis can use [[Bannerbomb ]]. The latest version of the Wii System Menu is [[System Menu 4.3|4.3]], therefore, this method should work for ALL USA, Japanese, Korean and PAL Wiis.
  
−
=== Twilight Hack ===
+
[[Smash Stack]] requires a copy of Super Smash Bros Brawl, and will work on all Wiis.
−
[[Image:Twilight Serial.jpg|thumb|right|Inner disc circle with a serial of RVL-RZDE-0A-0 JPN.]]
+
[[Indiana Pwns]] requires a copy of Lego Indiana Jones: The Original Adventures, and will work for NTSC-U, NTSC-J and PAL Wiis.
 +
[[Yu-Gi-OWNED!]] requires a copy of Yu-Gi-Oh 5D's Wheelie Breakers. It will only work on PAL Wiis. For NTSC-U and NTSC-J use [[Yu-Gi-Vah]].
 +
[[Bathaxx]] requires a copy of LEGO Batman, and will work for NTSC-U, NTSC-J and PAL Wiis.
 +
[[Return of the Jodi]] requires a copy of the original Lego Star Wars game or the newer (1.01) release (NTSC or PAL).
 +
[[Eri HaKawai]] requires a copy of Tales of Symphonia: Dawn of the New World, and will work for NTSC-U, NTSC-J and PAL Wiis.
 +
[[Wilbrand]] requires no game, and will work with any Wii running [[4.3]].
 +
== About the Homebrew Channel ==
 +
The [[Homebrew Channel]] is an application created by [[fail0verflow]], which allows users to easily load and use [[homebrew applications]], without having to use exploits such as Bannerbomb or the Twilight Hack every time they run a new application. After installation, the channel is accessible from the Wii Menu just like any other Wii channel. The channel can be deleted at any time through the Wii's "Data Management" menu. The Homebrew Channel does not show up in the console's play logs, however this does not affect the Wii in any way whatsoever.
  
−
The [[Twilight Hack]] is currently the only safe, public way to enable [[homebrew]] on a current Wii. It is executed by playing a specially designed savegame for The Legend of Zelda: Twilight Princess that loads and executes an application from the SD card in the Wii front SD slot.
+
== Setting up Homebrew Channel ==
 +
=== What is needed ===
 +
* A Wii console
 +
* An SD card [[SD/SDHC Card Compatibility Tests|(Check to see if yours is compatible)]]
 +
'''Note:''' SDHC cards can only be used by the [[Wilbrand]] exploit. Otherwise you must have an ''SD card'' that is 2GB or less.
 +
* The [http://bootmii.org/download/ HackMii installer]
 +
* An exploit that matches your Wii's version (and the game required to launch it, if necessary)
 +
* A computer (Windows, Linux, or macOS)
 +
* An SD card reader for your computer
  
−
Inside the zip file you will find versions of the hack for all three regions. You may copy the whole folder containing all of them to your SD card, your Wii will only be able to copy the one for your region and refuse the others in the copying process.
+
=== Part 1: Preparing the SD Card ===
  
−
When entering the savegame loading screen in Twilight Princess, USA users will be presented with two savegames of which only one will work (the other one does no harm, though, and will only halt the game). The easiest way to find out which one to use is to look up the last digit of the text on the '''inner''' circle of the '''data''' surface of the game disk (it's either 0 or 2).
+
(Smash Stack only): If you have any custom stages saved on the Wii (including the default ones), move them to the SD card or delete them. Then rename your '''<tt>private</tt>''' folder to '''<tt>privateold</tt>'''.
  
−
{| class="wikitable" style="width: 700px; text-align:center; font-size:90%;"
+
If you already have an SD card that is compatible with your Wii, you may be able to put all necessary files alongside the already existing files on your SD card given you have enough room. The Wii directory is called '''<tt>private</tt>''', and you need to use a folder called '''<tt>private</tt>''' containing Indiana Pwns, Yu-Gi-OWNED!, Bathaxx, Return of the Jodi or Smash Stack to trick your Wii into thinking that it made the file these exploits use.
 +
 
 +
If you would like, you may rename your current '''<tt>private</tt>''' directory to any name. (for example '''<tt>privateold</tt>''') Then, when you are finished with the hack, you can delete all hack files and rename '''<tt>privateold</tt>''' back to '''<tt>private</tt>''' to access all of your files again.
 +
 
 +
If you already have a compatible SD Card that has already been used in your Wii with a renamed '''<tt>private</tt>''' directory, you DO NOT have to format your SD card. Skip to the next step.
 +
 
 +
If you have a new SD card, or an SD card with no Wii files, it is recommended that you format it using the instructions below.
 +
 
 +
'''Important!''' This process will '''<span style="color:#dc382c">erase the data on the SD card</span>''' and it is therefore recommended that you make a back-up copy of any data you may currently have on your SD card before continuing.
 +
 
 +
===== Windows =====
 +
[[File:format.jpg|100px|thumb|right]]
 +
# Open up '''My Computer'''.
 +
# Right-click on the drive that contains the SD card and select '''Format...'''.
 +
# Under '''File system''' make sure you select '''FAT''' (see picture to the right).
 +
# Click "Start" and let the process finalize.
 +
# After the formatting is finished proceed to the next step.
 +
 
 +
===== macOS =====
 +
# Open up '''Disk Utility'''
 +
# Find your SD card in the navigation.
 +
# Go to the '''Erase''' tab.
 +
# Change the '''Volume Format''' to '''MS-DOS (FAT)'''.
 +
# Click "Erase" and let the process finalize.
 +
# After the formatting is finished proceed to the next step.
 +
 
 +
===== Linux =====
 +
# Open up a '''terminal'''.
 +
# Execute the command "'''<tt>mkfs.vfat /dev/<location of your SD card></tt>'''".
 +
# Caution not to reformat your hard disk. Think hard before formatting /dev/sda1, for example.
 +
# After the formatting is finished proceed to the next step.
 +
 
 +
=== Part 2: Copying files to SD card ===
 +
 
 +
# Ensure that the SD card slider is not in the locked position.
 +
# Download '''[[Indiana Pwns]]''', '''[[Yu-Gi-OWNED!]]''', '''[[Bathaxx]]''', '''[[Return of the Jodi]]''' or '''[[Smash Stack]]''' (make sure you have the correct version for your Wii System Menu) and the '''[http://bootmii.org/download/ HackMii installer]'''.
 +
# Extract both the exploit and HackMii installer in an easily accessible folder, such as your Desktop (pic. 1).
 +
# Open up the folder called '''<tt>hackmii_installer_X</tt>''' ( where X relates to your version as shown in pic. 2).
 +
# Copy file '''<tt>boot.elf</tt>'''{{Ref|The other three files contain information that made the creation of this tutorial possible but are not needed in the actual installation and use of the [[HackMii Installer]]}} to your SD card (pic. 3).
 +
# Finally, from the exploit archive, copy the folder called '''<tt>private</tt>''' to your SD card. Your SD card should look like pic. 4.
 +
 
 +
Contents That Should Be On Your SD Card:
 +
* '''<tt>private</tt>''' - Extracted From Indiana Pwns, Yu-Gi-OWNED!, Bathaxx, Return of the Jodi or Smash Stack
 +
* '''<tt>boot.elf</tt>''' - Extracted From The Hackmii Installer
 +
* (optional) '''<tt>privateold</tt>''' - The Wii's existing files renamed temporarily. (see "Preparing the SD Card")
 +
 
 +
<gallery "160px" heights="90px">
 +
File:Bannerbomb and hackmii.jpg|Extract the files to your Desktop
 +
File:Hackmii folder beta 3.jpg|Copy <tt>boot.elf</tt> to your SD card
 +
File:Private bannerbomb.jpg|Copy folder <tt>private</tt> to your SD card
 +
File:SD card boot and private.jpg|Your SD card should look like this in the end
 +
</gallery>
 +
 
 +
=== Part 3: Setting up your Wii ===
 +
In order to install the Homebrew Channel, you must first use an exploit of some kind. Use the chart below to determine what you will need to use:
 +
 
 +
{| class="wikitable"
 +
|-
 +
! Exploit Name
 +
! Game Required
 +
! USA
 +
! JPN
 +
! EUR
 +
! KOR
 +
! Compatible with...
 +
|-
 +
| [[Twilight Hack]]
 +
| Legend of Zelda: Twilight Princess
 +
| Yes
 +
| Yes
 +
| Yes
 +
| '''No'''
 +
| [[System Menu 3.4]] or earlier
 +
|-
 +
| [[Bannerbomb]]
 +
| ''None''
 +
| Yes
 +
| Yes
 +
| Yes
 +
| Yes
 +
| [[System Menu 4.2]] or earlier
 +
|-
 +
| [[Indiana Pwns]]
 +
| LEGO Indiana Jones
 +
| Yes
 +
| Yes
 +
| Yes
 +
| '''No'''
 +
| [[System Menu 4.3]] or earlier
 
|-
 
|-
−
! Region !! Inner circle text !! File !! Save slot
+
| [[Smash Stack]]
 +
| Super Smash Bros. Brawl
 +
| Yes
 +
| Yes
 +
| Yes
 +
| Yes
 +
| All firmwares
 
|-
 
|-
−
| Europe/Australia (EUR) || RVL-RZDP-0A-0 JPN || /private/wii/title/rzdp/data.bin || Twilight Hack
+
| [[Yu-Gi-OWNED!]]
 +
[[Yu-Gi-Vah]]
 +
| Yu-Gi-Oh 5D's Wheelie Breakers
 +
| Yes
 +
| Yes
 +
| Yes
 +
| '''No'''
 +
| [[System Menu 4.3]] or earlier
 
|-
 
|-
−
| Asia (JPN) || RVL-RZDJ-0A-0 JPN || /private/wii/title/rzdj/data.bin || Twilight Hack
+
| [[Bathaxx]]
 +
| LEGO Batman
 +
| Yes
 +
| Yes
 +
| Yes
 +
| '''No'''
 +
| [[System Menu 4.3]] or earlier
 
|-
 
|-
−
| America (USA) || RVL-RZDE-0A-'''0''' JPN || /private/wii/title/rzde/data.bin || TwilightHack'''0'''
+
| [[Return of the Jodi]]
 +
| Lego Star Wars
 +
| Yes
 +
| Yes
 +
| Yes
 +
| '''No'''
 +
| [[System Menu 4.3]] or earlier
 
|-
 
|-
−
| America (USA) || RVL-RZDE-0A-'''0''' USA || /private/wii/title/rzde/data.bin || TwilightHack'''0'''  
+
| [[Eri HaKawai]]
 +
| Tales of Symphonia
 +
| Yes
 +
| Yes
 +
| Yes
 +
| '''No'''
 +
| [[System Menu 4.3]] or earlier
 
|-
 
|-
−
| America (USA) || RVL-RZDE-0A-'''2''' USA || /private/wii/title/rzde/data.bin || TwilightHack'''2'''
+
| [[Wilbrand]]
 +
| None
 +
| Yes
 +
| Yes
 +
| Yes
 +
| Yes
 +
| [[System Menu 4.3]]
 +
|-
 +
| [https://wiiubrew.org/wiki/Wuphax Wuphax]
 +
| [[Mii Channel]]
 +
| Yes
 +
| Yes
 +
| Yes
 +
| Yes
 +
| [[System Menu 4.3-U]]
 
|}
 
|}
  
−
=== Homebrew Channel ===
+
If you are unsure of which exploit to choose, pick [[str2hax]] if you are on a normal Wii or Wii Family Edition, [https://wiiubrew.org/wiki/Wuphax Wuphax] on a Wii U's vWii, or [[Bluebomb]] if you are on a [[Wii Mini]].
 +
 
 +
====Indiana Pwns====
 +
 
 +
# Make sure you have booted Lego Indiana Jones at least once. Otherwise, the hacked save won't copy
 +
# Turn on the Wii, and go to Settings>Data Management>Saves>SD and find the Indiana Pwns save for your region and copy it to the Wii
 +
# Return to the System Menu
 +
# Boot Lego Indiana Jones
 +
# Load the saved game you just copied to the Wii.
 +
# When the game loads, you will be in Barnett College. Walk to the Art Room (through the Courtyard), approach the left character on the podium. When it zooms on him, choose the switch to option (two silhouettes, staggered, with an arrow pointing between them).
 +
# boot.elf from your SD card should now load
 +
 
 +
====Smash Stack====
 +
 
 +
Before inserting your SD card, boot the game and go to the stage builder and make sure to erase all the custom sample stages.
 +
 
 +
# Insert SD card into Wii
 +
# Boot Super Smash Bros Brawl
 +
# Go to the Stage Creator
 +
# boot.elf from your SD card should now load
 +
 
 +
====Yu-Gi-OWNED!====
 +
 
 +
# Make sure you have booted Yu-Gi-Oh 5D's Wheelie Breakers at least once. Otherwise, the hacked save won't copy.
 +
# Put your SD Card in your Wii.
 +
# Go into Wii Options -> Data Management -> Save Data -> Wii.
 +
# Go to the SD Card and move the [[Yu-Gi-OWNED!]] save to your Wii.
 +
# Boot Yu-Gi-OH 5D's Wheelie Breakers.
 +
# Press {{WiimoteAButton}} and wait until the title menu shows up.
 +
# Press {{WiimoteAButton}} and you will see a loading screen. Wait a couple of seconds and your homebrew will be executed.
 +
 
 +
====Bathaxx====
 +
 
 +
# Make sure you have booted LEGO Batman at least once. Otherwise, the hacked save won't copy
 +
# Turn on the Wii, and go to Settings>Data Management>Saves>SD and find the Bathaxx save for your region and copy it to the Wii
 +
# Return to the System Menu
 +
# Boot LEGO Batman
 +
# Load the saved game you just copied to the Wii.
 +
# When the game loads, you will be in the batcave, take the elevator on the right side. Then in the trophy room, go to the upper corner and go through the door in order to enter the "Wayne Manor". Now you can select a character. Choose the last enabled one in the lowest row.
 +
# boot.elf from your SD card should now load
 +
 
 +
====Return of the Jodi====
 +
 
 +
# Make sure you have booted Lego Star Wars at least once. Otherwise, the hacked save won't copy
 +
# Turn on the Wii, and go to Settings>Data Management>Saves>SD and find the Return of the Jodi save for your region and copy it to the Wii
 +
# Return to the System Menu
 +
# Boot Lego Star Wars
 +
# Load the saved game you just copied to the Wii.
 +
# Walk over to the bar, and highlight the character named "Return of Jodi" and press A.
 +
# boot.elf from your SD card should now load
 +
 
 +
====Eri Hakawai====
 +
 
 +
# Make sure you have booted Tales of Symphonia at least once. Otherwise, the hacked save won't copy
 +
# Turn on the Wii, and go to Settings>Data Management>Saves>SD and find the Eri HaKawai save for your region and copy it to the Wii
 +
# Return to the System Menu
 +
# Start the game and load the first save
 +
# Press the PLUS button to enter the game menu
 +
# Scroll to the STATUS button and press A
 +
# Scroll to the monster named "Eri HaKawai" (NTSC version: "Giantpune") and press A
 +
# boot.elf from your SD card should now load
 +
 
 +
====Wilbrand====
 +
#Go to [http://wilbrand.donut.eu.org] (Should both websites be down, use [[Wilbrand]])
 +
#Select your region
 +
#On the Wii, go to Wii Options> Wii Settings> page 2> Internet> Console Information. Enter your MAC Address into the boxes in Wilbrand
 +
#Make sure the HackMii installer is bundled with your download
 +
#Cut the red wire to download the .zip file and unzip it
 +
#Copy "private" folder and "boot.elf" to your SD Card (Can also be SDHC)
 +
#Insert the SD card to your Wii and go to Wii Message Board
 +
#You should see a red envelope that looks like the one on "wilbrand.donut.eu.org". Click it, and BOOM!
 +
 
 +
=== Part 4: Installing the Homebrew Channel ===
 +
# You will be presented with one of the screens below; if you have a new Wii you will only be able to install [[BootMii]] as IOS.
 +
# Select continue.
 +
# Go to '''Homebrew Channel''' > '''Install the Homebrew Channel'''. You will be asked whether you want to install the channel; select yes. After installation you should get a message "finished" and return you to the initial menu.
 +
# If possible, install '''BootMii''' as '''boot2'''; if not install it as an '''IOS'''. ([[BootMii|What is BootMii?]])
 +
 
 +
<gallery widths="160px" heights="90px">
 +
File:HackMiiInstallerScreen.jpg|Can Install BootMii as boot2
 +
File:Hackmiistatus.JPG|Cannot install BootMii as boot2 (newer Wii consoles)
 +
</gallery>
 +
 
 +
== Running Bootmii Through HBC ==
 +
 
 +
If you're one of the late-comers to the Wii party you may have had to install BootMii via IOS.
 +
In that case you have to run BootMii by going into The HBC and hit the "Home" button on your Wii Remote.
 +
Place your cursor onto the "Launch BootMii" selection and press A.{{Ref|Once you press A on your Wii Remote it will power off and be unusable. You have to use a GameCube controller plugged into slot #1, or the three buttons on the front of the console.}}
 +
<gallery widths="160px" heights="90px">
 +
File:Launchbootmii.JPG
 +
</gallery>
 +
 
 +
<b>Extra Note</b><br />
 +
While in BootMii, you should back up your NAND memory. This is mainly for those who have installed bootmii as Boot2, but should still be done when installed as IOS.  If you brick your Wii and have BootMii installed as IOS ''and'' have Priiloader installed, you ''might'' be able to recover your NAND by loading BootMii through Priiloader.
 +
When in BootMii, you will not have access to the wii-mote, so you will have to use a gamecube controller, or the buttons on the Wii itself. (<i>power button</i> is move cursor, <i>reset button</i> is select option.) '''THIS ONLY APPLIES TO THE BOOTMII APPLICATION ITSELF, THE HACKMII INSTALLER ''DOES'' SUPPORT THE WIIMOTE.'''<br />
 +
Select the 4th option then hit A/Reset, then you are taken to a new option. <br />
 +
The first corresponds to the backing up of NAND memory, the second; "injecting" NAND back into memory... <br />
 +
Select the first option (you must have at least 512MB of space on SD card to do so) to back up NAND. <br />
 +
 
 +
'''To restore a corrupt NAND with an IOS BootMii:'''
 +
 
 +
<ol>
 +
<li>Load BootMii (The Homebrew Channel or Priiloader)</li>
 +
<li>Select the 4th option (with the gears)</li>
 +
<li>Select the 2nd option to restore the NAND</li>
 +
<li>Wait a while</li>
 +
</ol>
 +
 
 +
== Troubleshooting ==
 +
''When I insert my SD card to start the process nothing happens!''
 +
*One of 4 things has happened:
 +
# You didn't place the data on the SD card right.
 +
# You went into the save game data menu instead of the channel menu.
 +
# You need to set the archive bit of the private\wii\title\aktn\content.bin.
 +
# You need the next bannerbomb zip. Download the next one and start over.
 +
 
 +
''OMG!! One of the selections is purple and says I can't install BootMii!!''
 +
*You haven't read this page in detail, this is explained further up with a picture of the screen.
 +
 
 +
''My Wiimote quit working when i loaded up BootMii! Why? and Can this be fixed?''
 +
*You didn't read BootMii's [http://www.bootmii.org/faq/ FAQ] or the README file located in the Hackmii installer archive.
 +
Both state that you have to use a Gamecube controller or the Power/Reset/Eject buttons on the console.
 +
In order for this to be fixed a lot of coding will have to be done to make a custom Bluetooth stack and drivers for BootMii. This isn't on the top of the priority list.
  
−
The [[Homebrew Channel]] is a self-updating homebrew application loader by [[Team Twiizers]] which allows users to load [[homebrew applications]] without having to run the [[Twilight Hack]] every time. Once installed, users can access the channel from the Wii Menu just like any other Wii channel.  
+
''I get Error -2 trying to install The Homebrew Channel or DVDx and Error -1 trying to install BootMii''
 +
*Your SD card slider is in the Lock position, so it is read only.  
  
−
== Homebrew Setup ==
+
''Will my Wavebird wireless controller work?''
 +
*Yes, but you must hold any (unused) button when you start up your Wii.
 +
::(Wavebird wireless controller now supported in beta3)
  
−
=== Requirements ===
+
Any other questions should be directed to the [[WiiBrew:FAQ]]. I'm human after all and can't remember every question that is asked but will update as necessary
  
−
* SD card (any one smaller then 2GB with fat16 file system and a mere 3Mb of free space will do!)
+
<gallery widths="160px" heights="90px">
−
* SD card reader
+
File:HackMiiInstallerScreen.jpg|Can Install BootMii as boot2
−
* The Legend of Zelda: Twilight Princess that has been played at least once
+
File:Hackmiistatus.JPG|Can not install BootMii as boot2
−
* [[Twilight Hack]] ([http://hbc.hackmii.com/dist/twilight-hack-v0.1-beta1.zip download])
+
</gallery>
−
* [[Homebrew Channel]] ([http://hbc.hackmii.com/dist/the_homebrew_channel-beta_9.tar.gz download])
 
  
−
=== Step by Step ===
+
If everything went as planned you should have everything installed and should select "exit" and your Wii will load into the Homebrew Channel, Or into the system menu with The Homebrew Channel on the menu.
  
−
# Optionally format your SD card to FAT16 (called "FAT" in windows) or FAT32 (you may safely skip this if it's alread FAT. Hint: if your camera can use it, it probably already is)
+
== Notes ==
−
#*If you get an error such as <tt>Failed to read boot.elf (-1)</tt>, try reformatting your SD card with the [http://www.sdcard.org/about/downloads/ Official SD Card Format Tool].
+
{{References}}
−
# Copy the "private" directory from the Twilight Hack download to the root of your SD card.
 
−
# Copy "boot.dol" from the Homebrew Channel download to to the root of your SD card.
 
−
# Put your SD card in your Wii and turn it on.
 
−
# Go into Wii Options --> Data Management --> Save Data --> Wii.
 
−
# Find your Zelda save, click on it, click "Erase", and click Yes (you may want to backup your save before doing that... To do that, simply put in ANOTHER SD card, copy to the SD card, then go back to those steps).
 
−
# Open the SD card and select the "Twilight Hack" save that corresponds to your game region. (hint: save only the right one on the SD at the begining)
 
−
# Click copy and then yes. Now exit out of the menu.
 
−
# Insert The Legend of Zelda: Twilight Princess game disc and run the game.
 
−
#*If you have the USA version of the game, load the "TwilightHack0" or "TwilightHack2" version of the game as appropriate (see the table above).
 
−
#*Otherwise, load the only "Twilight Hack" save game.
 
−
# Once in the game, either walk backwards or talk to the man standing in front of you. *do not do anything else, like openining the inventory... or it will freeze you console and you will have to cut power to reset)
 
−
# The Homebrew Channel installer should now load.
 
−
# '''READ THE DISCLAIMER!''' In the VERY unlikely case your Wii should be [[Brick|bricked]] by the installer, this will let you know where you stand in regards to Team Twiizers.
 
−
# Press the RESET button on your Wii. (or button "1" on the wiimote)
 
−
# Done!
 
  
−
==See also==
+
== External links ==
−
* [[Twilight Hack]]
+
* [http://wiisixtyfour.webs.com/WHG/WHG.htm Wii Homebrew Channel Installation Guide] — Simple guide for getting the [[Homebrew Channel]] set up using any of the exploits out there. Made by [[User:Bg4545|wiisixtyfour]].
−
* [[Homebrew Channel]]
+
* [http://www.youtube.com/watch?v=11gvyJSkU3Q&fmt=35 Homebrew showcase] — A YouTube video presentation of popular [[List of homebrew applications|Homebrew applications]]
−
* [[Homebrew applications]]
+
* [http://hackmii.com/ HackMii blog] — Blog of one of the creators of the [[Homebrew Channel]]
 +
* [http://www.youtube.com/watch?v=i2T66MbXtpY Smash Stack Tutorial] — Great video tutorial for the Smash Stack exploit by [[User:DsHacker14|DsHacker14]]
  
 
[[Category:Homebrew]]
 
[[Category:Homebrew]]
 +
[[Category:How To]]

Latest revision as of 17:57, 2 April 2025

This is a step-by-step guide of how to install the Homebrew Channel on your Wii console. The methods described in this tutorial cover the Smash Stack, Yu-Gi-OWNED!, Bathaxx, Return of the Jodi, Indiana Pwns, Eri HaKawai and Wilbrand exploits as these are the only methods working for 4.3; other methods of installing the Homebrew Channel for users with older System Menus are Bannerbomb and the Twilight Hack.

This tutorial applies to versions of the Wii System Menu ranging from 3.0 to 4.3. Older Korean Wiis can use Bannerbomb . The latest version of the Wii System Menu is 4.3, therefore, this method should work for ALL USA, Japanese, Korean and PAL Wiis.

Smash Stack requires a copy of Super Smash Bros Brawl, and will work on all Wiis. Indiana Pwns requires a copy of Lego Indiana Jones: The Original Adventures, and will work for NTSC-U, NTSC-J and PAL Wiis. Yu-Gi-OWNED! requires a copy of Yu-Gi-Oh 5D's Wheelie Breakers. It will only work on PAL Wiis. For NTSC-U and NTSC-J use Yu-Gi-Vah. Bathaxx requires a copy of LEGO Batman, and will work for NTSC-U, NTSC-J and PAL Wiis. Return of the Jodi requires a copy of the original Lego Star Wars game or the newer (1.01) release (NTSC or PAL). Eri HaKawai requires a copy of Tales of Symphonia: Dawn of the New World, and will work for NTSC-U, NTSC-J and PAL Wiis. Wilbrand requires no game, and will work with any Wii running 4.3.

About the Homebrew Channel

The Homebrew Channel is an application created by fail0verflow, which allows users to easily load and use homebrew applications, without having to use exploits such as Bannerbomb or the Twilight Hack every time they run a new application. After installation, the channel is accessible from the Wii Menu just like any other Wii channel. The channel can be deleted at any time through the Wii's "Data Management" menu. The Homebrew Channel does not show up in the console's play logs, however this does not affect the Wii in any way whatsoever.

Setting up Homebrew Channel

What is needed

Note: SDHC cards can only be used by the Wilbrand exploit. Otherwise you must have an SD card that is 2GB or less.

  • The HackMii installer
  • An exploit that matches your Wii's version (and the game required to launch it, if necessary)
  • A computer (Windows, Linux, or macOS)
  • An SD card reader for your computer

Part 1: Preparing the SD Card

(Smash Stack only): If you have any custom stages saved on the Wii (including the default ones), move them to the SD card or delete them. Then rename your private folder to privateold.

If you already have an SD card that is compatible with your Wii, you may be able to put all necessary files alongside the already existing files on your SD card given you have enough room. The Wii directory is called private, and you need to use a folder called private containing Indiana Pwns, Yu-Gi-OWNED!, Bathaxx, Return of the Jodi or Smash Stack to trick your Wii into thinking that it made the file these exploits use.

If you would like, you may rename your current private directory to any name. (for example privateold) Then, when you are finished with the hack, you can delete all hack files and rename privateold back to private to access all of your files again.

If you already have a compatible SD Card that has already been used in your Wii with a renamed private directory, you DO NOT have to format your SD card. Skip to the next step.

If you have a new SD card, or an SD card with no Wii files, it is recommended that you format it using the instructions below.

Important! This process will erase the data on the SD card and it is therefore recommended that you make a back-up copy of any data you may currently have on your SD card before continuing.

Windows
Format.jpg
  1. Open up My Computer.
  2. Right-click on the drive that contains the SD card and select Format....
  3. Under File system make sure you select FAT (see picture to the right).
  4. Click "Start" and let the process finalize.
  5. After the formatting is finished proceed to the next step.
macOS
  1. Open up Disk Utility
  2. Find your SD card in the navigation.
  3. Go to the Erase tab.
  4. Change the Volume Format to MS-DOS (FAT).
  5. Click "Erase" and let the process finalize.
  6. After the formatting is finished proceed to the next step.
Linux
  1. Open up a terminal.
  2. Execute the command "mkfs.vfat /dev/<location of your SD card>".
  3. Caution not to reformat your hard disk. Think hard before formatting /dev/sda1, for example.
  4. After the formatting is finished proceed to the next step.

Part 2: Copying files to SD card

  1. Ensure that the SD card slider is not in the locked position.
  2. Download Indiana Pwns, Yu-Gi-OWNED!, Bathaxx, Return of the Jodi or Smash Stack (make sure you have the correct version for your Wii System Menu) and the HackMii installer.
  3. Extract both the exploit and HackMii installer in an easily accessible folder, such as your Desktop (pic. 1).
  4. Open up the folder called hackmii_installer_X ( where X relates to your version as shown in pic. 2).
  5. Copy file boot.elf[1] to your SD card (pic. 3).
  6. Finally, from the exploit archive, copy the folder called private to your SD card. Your SD card should look like pic. 4.

Contents That Should Be On Your SD Card:

  • private - Extracted From Indiana Pwns, Yu-Gi-OWNED!, Bathaxx, Return of the Jodi or Smash Stack
  • boot.elf - Extracted From The Hackmii Installer
  • (optional) privateold - The Wii's existing files renamed temporarily. (see "Preparing the SD Card")

  • Extract the files to your Desktop

  • Copy boot.elf to your SD card

  • Copy folder private to your SD card

  • Your SD card should look like this in the end

Part 3: Setting up your Wii

In order to install the Homebrew Channel, you must first use an exploit of some kind. Use the chart below to determine what you will need to use:

Exploit Name Game Required USA JPN EUR KOR Compatible with...
Twilight Hack Legend of Zelda: Twilight Princess Yes Yes Yes No System Menu 3.4 or earlier
Bannerbomb None Yes Yes Yes Yes System Menu 4.2 or earlier
Indiana Pwns LEGO Indiana Jones Yes Yes Yes No System Menu 4.3 or earlier
Smash Stack Super Smash Bros. Brawl Yes Yes Yes Yes All firmwares
Yu-Gi-OWNED!

Yu-Gi-Vah

Yu-Gi-Oh 5D's Wheelie Breakers Yes Yes Yes No System Menu 4.3 or earlier
Bathaxx LEGO Batman Yes Yes Yes No System Menu 4.3 or earlier
Return of the Jodi Lego Star Wars Yes Yes Yes No System Menu 4.3 or earlier
Eri HaKawai Tales of Symphonia Yes Yes Yes No System Menu 4.3 or earlier
Wilbrand None Yes Yes Yes Yes System Menu 4.3
Wuphax Mii Channel Yes Yes Yes Yes System Menu 4.3-U

If you are unsure of which exploit to choose, pick str2hax if you are on a normal Wii or Wii Family Edition, Wuphax on a Wii U's vWii, or Bluebomb if you are on a Wii Mini.

Indiana Pwns

  1. Make sure you have booted Lego Indiana Jones at least once. Otherwise, the hacked save won't copy
  2. Turn on the Wii, and go to Settings>Data Management>Saves>SD and find the Indiana Pwns save for your region and copy it to the Wii
  3. Return to the System Menu
  4. Boot Lego Indiana Jones
  5. Load the saved game you just copied to the Wii.
  6. When the game loads, you will be in Barnett College. Walk to the Art Room (through the Courtyard), approach the left character on the podium. When it zooms on him, choose the switch to option (two silhouettes, staggered, with an arrow pointing between them).
  7. boot.elf from your SD card should now load

Smash Stack

Before inserting your SD card, boot the game and go to the stage builder and make sure to erase all the custom sample stages.

  1. Insert SD card into Wii
  2. Boot Super Smash Bros Brawl
  3. Go to the Stage Creator
  4. boot.elf from your SD card should now load

Yu-Gi-OWNED!

  1. Make sure you have booted Yu-Gi-Oh 5D's Wheelie Breakers at least once. Otherwise, the hacked save won't copy.
  2. Put your SD Card in your Wii.
  3. Go into Wii Options -> Data Management -> Save Data -> Wii.
  4. Go to the SD Card and move the Yu-Gi-OWNED! save to your Wii.
  5. Boot Yu-Gi-OH 5D's Wheelie Breakers.
  6. Press Wiimote A Button and wait until the title menu shows up.
  7. Press Wiimote A Button and you will see a loading screen. Wait a couple of seconds and your homebrew will be executed.

Bathaxx

  1. Make sure you have booted LEGO Batman at least once. Otherwise, the hacked save won't copy
  2. Turn on the Wii, and go to Settings>Data Management>Saves>SD and find the Bathaxx save for your region and copy it to the Wii
  3. Return to the System Menu
  4. Boot LEGO Batman
  5. Load the saved game you just copied to the Wii.
  6. When the game loads, you will be in the batcave, take the elevator on the right side. Then in the trophy room, go to the upper corner and go through the door in order to enter the "Wayne Manor". Now you can select a character. Choose the last enabled one in the lowest row.
  7. boot.elf from your SD card should now load

Return of the Jodi

  1. Make sure you have booted Lego Star Wars at least once. Otherwise, the hacked save won't copy
  2. Turn on the Wii, and go to Settings>Data Management>Saves>SD and find the Return of the Jodi save for your region and copy it to the Wii
  3. Return to the System Menu
  4. Boot Lego Star Wars
  5. Load the saved game you just copied to the Wii.
  6. Walk over to the bar, and highlight the character named "Return of Jodi" and press A.
  7. boot.elf from your SD card should now load

Eri Hakawai

  1. Make sure you have booted Tales of Symphonia at least once. Otherwise, the hacked save won't copy
  2. Turn on the Wii, and go to Settings>Data Management>Saves>SD and find the Eri HaKawai save for your region and copy it to the Wii
  3. Return to the System Menu
  4. Start the game and load the first save
  5. Press the PLUS button to enter the game menu
  6. Scroll to the STATUS button and press A
  7. Scroll to the monster named "Eri HaKawai" (NTSC version: "Giantpune") and press A
  8. boot.elf from your SD card should now load

Wilbrand

  1. Go to [1] (Should both websites be down, use Wilbrand)
  2. Select your region
  3. On the Wii, go to Wii Options> Wii Settings> page 2> Internet> Console Information. Enter your MAC Address into the boxes in Wilbrand
  4. Make sure the HackMii installer is bundled with your download
  5. Cut the red wire to download the .zip file and unzip it
  6. Copy "private" folder and "boot.elf" to your SD Card (Can also be SDHC)
  7. Insert the SD card to your Wii and go to Wii Message Board
  8. You should see a red envelope that looks like the one on "wilbrand.donut.eu.org". Click it, and BOOM!

Part 4: Installing the Homebrew Channel

  1. You will be presented with one of the screens below; if you have a new Wii you will only be able to install BootMii as IOS.
  2. Select continue.
  3. Go to Homebrew Channel > Install the Homebrew Channel. You will be asked whether you want to install the channel; select yes. After installation you should get a message "finished" and return you to the initial menu.
  4. If possible, install BootMii as boot2; if not install it as an IOS. (What is BootMii?)

  • Can Install BootMii as boot2

  • Cannot install BootMii as boot2 (newer Wii consoles)

Running Bootmii Through HBC

If you're one of the late-comers to the Wii party you may have had to install BootMii via IOS. In that case you have to run BootMii by going into The HBC and hit the "Home" button on your Wii Remote. Place your cursor onto the "Launch BootMii" selection and press A.[2]

  • Launchbootmii.JPG

Extra Note
While in BootMii, you should back up your NAND memory. This is mainly for those who have installed bootmii as Boot2, but should still be done when installed as IOS. If you brick your Wii and have BootMii installed as IOS and have Priiloader installed, you might be able to recover your NAND by loading BootMii through Priiloader. When in BootMii, you will not have access to the wii-mote, so you will have to use a gamecube controller, or the buttons on the Wii itself. (power button is move cursor, reset button is select option.) THIS ONLY APPLIES TO THE BOOTMII APPLICATION ITSELF, THE HACKMII INSTALLER DOES SUPPORT THE WIIMOTE.
Select the 4th option then hit A/Reset, then you are taken to a new option.
The first corresponds to the backing up of NAND memory, the second; "injecting" NAND back into memory...
Select the first option (you must have at least 512MB of space on SD card to do so) to back up NAND.

To restore a corrupt NAND with an IOS BootMii:

  1. Load BootMii (The Homebrew Channel or Priiloader)
  2. Select the 4th option (with the gears)
  3. Select the 2nd option to restore the NAND
  4. Wait a while

Troubleshooting

When I insert my SD card to start the process nothing happens!

  • One of 4 things has happened:
  1. You didn't place the data on the SD card right.
  2. You went into the save game data menu instead of the channel menu.
  3. You need to set the archive bit of the private\wii\title\aktn\content.bin.
  4. You need the next bannerbomb zip. Download the next one and start over.

OMG!! One of the selections is purple and says I can't install BootMii!!

  • You haven't read this page in detail, this is explained further up with a picture of the screen.

My Wiimote quit working when i loaded up BootMii! Why? and Can this be fixed?

  • You didn't read BootMii's FAQ or the README file located in the Hackmii installer archive.

Both state that you have to use a Gamecube controller or the Power/Reset/Eject buttons on the console. In order for this to be fixed a lot of coding will have to be done to make a custom Bluetooth stack and drivers for BootMii. This isn't on the top of the priority list.

I get Error -2 trying to install The Homebrew Channel or DVDx and Error -1 trying to install BootMii

  • Your SD card slider is in the Lock position, so it is read only.

Will my Wavebird wireless controller work?

  • Yes, but you must hold any (unused) button when you start up your Wii.
(Wavebird wireless controller now supported in beta3)

Any other questions should be directed to the WiiBrew:FAQ. I'm human after all and can't remember every question that is asked but will update as necessary

  • Can Install BootMii as boot2

  • Can not install BootMii as boot2

If everything went as planned you should have everything installed and should select "exit" and your Wii will load into the Homebrew Channel, Or into the system menu with The Homebrew Channel on the menu.

Notes

↑ 1. The other three files contain information that made the creation of this tutorial possible but are not needed in the actual installation and use of the HackMii Installer
↑ 2. Once you press A on your Wii Remote it will power off and be unusable. You have to use a GameCube controller plugged into slot #1, or the three buttons on the front of the console.

External links

Retrieved from "https://wiibrew.org/w/index.php?title=Homebrew_setup&oldid=120849"