Changes

:I was able to initialize the Kama and get data from it. My procedure is as follows: Write 0x55 to a400f0, write 0x00 to a400fb; then set up the encryption key (without it, the Nunchuk doesn't work) at a40040 (16 bytes). As a last step, set Data Reporting Mode to 0x37 (my Kama does not work when I set Data Reporting Mode prior to setting up the registers).

:I was able to initialize the Kama and get data from it. My procedure is as follows: Write 0x55 to a400f0, write 0x00 to a400fb; then set up the encryption key (without it, the Nunchuk doesn't work) at a40040 (16 bytes). As a last step, set Data Reporting Mode to 0x37 (my Kama does not work when I set Data Reporting Mode prior to setting up the registers).

:This way, buttons are reported correctly, but the joystick values seem to be wrong. Do I need to decrypt the values? The original Nunchuk still works with this altered initialization sequence (unencrypted!).

:This way, buttons are reported correctly, but the joystick values seem to be wrong. Do I need to decrypt the values? The original Nunchuk still works with this altered initialization sequence (unencrypted!).--[[User:Andyboeh|Andyboeh]] 23:45, 19 April 2009 (UTC)

--[[User:Andyboeh|Andyboeh]] 23:45, 19 April 2009 (UTC)

=== Snakebyte Wireless Motion XS ===

=== Snakebyte Wireless Motion XS ===