Hollywood
The security chip in the Wii is known as Hollywood; it bears the logos of NEC (who presumably manufactured the chip), ATI (who designed the GPU inside), and BroadOn (who designed the Starlet "I/O Bridge").
Its hardware is documented on the Hardware article and subpages. Hardware inside includes the GX, boot0 ROM, OTP, and Starlet
Pinout (Hollywood, Hollywood AA)
The Hollywood chip is 2 or 3 flip-chip dies bonded to a BGA substrate, with a 30 x 30 (or later, 28x28) grid of balls to connect it to the rest of the circuit. Most balls are connected to other layers by way of vias; some signals are routed completely on the top layer.
(Please help verify and complete this pinout with a continuity tester! This pinout is for the earlier 30x30 version of the Hollywood; the 28x28 package has a completely different pinout.)
Pins grouped by function
| Function | Balls |
| Ground | A1, A15, A17, A30, B4, B16, B17, B18, B29, C17, C18, C19, C24, C25, C27, C29, D4, D25, D26, D27 |
| NAND Flash | C1, C2, D1, D2, D3, E1, E2, E3, E4, F1, F2, F3, F4, F5, G4, G5, H4, J1 |
| GDDR3 | R2, R3, T1, U1, U2, V2, W1, X1, Y3, Y4, AA2, AA3, AA4, AA5, AB2, AB3, AB4 |
| USB | A26, A27, A28, B26, B27, B28 |
| AVE | D28, E28, G28, H28, H29, J27, J28, J29, J30 |
Pinout (Hollywood-1, Hollywood-2)
| This article is a stub. You can help WiiBrew by expanding it. |
Hollywood ID
It seems to be implied by the formulas used for the Wii Number that the Hollywood ID is a 32bit unsigned int.[check]