834
edits
Changes
no edit summary
Line 30:
Line 30:
|-
−||0x0D8000C4||GPIO || || || probably direction
−|-
−||0x0D8000DC||???
−|-
−||0x0D8000E0||GPIO || || || 0x08 -- set to enable DC/DC converter,
−|-
−||0x0D8000E1||GPIO || || ||
−|-
−||0x0D8000E2||GPIO || || || debug / "POST" port -- connected to 8 testpads. boot0 / 1 / 2 output simple codes to indicate boot status.
−|-
−||0x0D8000E3||GPIO || || ||
−|-
−||0x0D8000E4||GPIO || || || probably direction
−|-
−||0x0D8000EC||???
−|-
−||0x0D8000F0|| ? typical value is 0x0070FFF6; pressing the POWER button will set the 0x1 bit
−|-
−||0x0D8000F4||???
−|-
−||0x0D8000FC||???
−|-
−||0x0D800100||???
−|-
−||0x0D80010C||???
−|-
−||0x0D800110||???
−|-
−||0x0D800114||???
−|-
−||0x0D800118||???
−|-
−||0x0D80011C||???
−|-
−||0x0D800120||???
−|-
−||0x0D800130||???
−|-
−||0x0D800134||???
−|-
−||0x0D800138||???
−|-
−||0x0D800180||??? || || || set 0x40 for legacy DI; 0x100000 set after loadEXI (boot code)
−|-
−||0x0D800188||???
−|-
−||0x0D80018C||???
−|-
−||0x0D800190||??? || || || involved in DSKPLL init
−|-
−||0x0D800194||??? || || || 0x400 is DI reset (low active) / involved in DSKPLL init
−|-
−||0x0D800198||??? || || || set to 0x00FFFFFF as part of "interface / subsytem powerup"
−|-
−||0x0D8001B0||??? || || || ACRPLLSYS
−|-
−||0x0D8001B0||??? || || || ACRPLLSYSEXT
−|-
−||0x0D8001B8||??? || || || involved in DSKPLL init
−|-
−||0x0D8001BC||???
−|-
−||0x0D8001C0||???
−|-
−||0x0D8001DC||??? || || || set to 0x00FFFFFF as part of "interface / subsytem powerup"
−|-
|-
−|0x0D806000|| DI || looks almost identical to the Gamecube DI interface
−|-
−||0x0D806000|| DISR || || || DI status register
−|-
−||0x0D806004|| DICVR || || || DI cover register (status2)
−|-
−||0x0D806008|| DICMDBUF0 || || || DI command buffer 0
−|-
−||0x0D80600C|| DICMDBUF1 || || || DI command buffer 1
−|-
−||0x0D806010|| DICMDBUF2 || || || DI command buffer 2
−|-
−||0x0D806014|| DIMAR || || || DI DMA memory address register
−|-
−||0x0D806018|| DILENGTH || || || DI DMA transfer length register
−|-
−||0x0D806020|| DIMMBUF || || || DI immediate data buffer
−|-
−||0x0D806024|| DICFG || || || DI configuration register
||0x0D800070||??? || || || set 0x10 for legacy DI; 0x1 to allow write to exi boot buffer
||0x0D800070||??? || || || set 0x10 for legacy DI; 0x1 to allow write to exi boot buffer
|-
|-
−||0x0D8000C0||GPIO || || || probably data: 0x200 for eject; 0x100 sensor bar enable; 0x20 for tray led
+|
−||0x0D8001EC||OTP || || || OTP read address (addresses run from 0x80000000..0x8000001F)
||0x0D8001EC||OTP || || || OTP read address (addresses run from 0x80000000..0x8000001F)
|-
|-
Line 119:
Line 52:
|-
|-
||0x0D800224 - 03FF || || || unused
||0x0D800224 - 03FF || || || unused
−|-
|-
||0x0D806800||EXI
||0x0D806800||EXI