User:-Onroblox-ebenjag

From WiiBrew
Jump to navigation Jump to search

nothing here :) soy de honduras :D (im from honduras :D)

how to homebrew your wii

if you don't want to use your/don't have a sd card, try out the eula hack named str2hax

ABOVE DOESN'T WORK FOR DOLPHIN

if you have a virtual (sd.raw in dolphin) sd card and is using a emulator, you can use the Open Homebrew Channel's wad.

ABOVE WORKS FOR DOLPHIN

if you have a physical sd card, follow the steps to use letterbomb here

if you don't want to visit that even tho it's reccomended or you don't know what to do because you don't understand the page look below

generated steps by chatgpt - modified by me - more added by me

# Gather the required materials:
* A Wii console with System Menu 4.3
* An SD card (512 MB or larger)
* An internet-connected computer
# Format the SD card as FAT32 and place it in the Wii console.
# Connect the Wii console to the internet and go to the Wii System Settings.
# Navigate to the "Data Management" menu and then to the "Channels" submenu.
# Write down the MAC address listed on this page (it should be a string of 12 characters).
# Go to the website for the LetterBomb exploit (https://please.hackmii.com/).
# Enter the MAC address of your Wii console and select "Generate".
# Follow the instructions on the website to download the LetterBomb ZIP file to your computer.
# Extract the contents of the ZIP file to the root of the SD card.
# Disconnect the Wii from the internet, and then turn it off.
# Insert the SD card into the Wii and turn it on.
# Load the System Menu and navigate to the Message Board.
# Find the envelope with a bomb, these are usually Today, Yesterday, 2 days ago
# Wait for the exploit to run, and then after 30 seconds press "1" to continue to the HackMii Installer.
# Press DPAD up until you've selected "Install The Homebrew Channel"
# Now you will have a new option called "Uninstall The Homebrew Channel", but since you're homebrewing your wii/softmodding your wii, you can do that any time when you're bored of the homebrew channel.
# Press BootMii.. If you want extra protection for your wii. You can install it as a IOS or something else
# Go to The homebrew channel and boot to BootMii by pressing the Home Button and then clicking Launch BootMii
# Press the Power Button 3 times until you are close to the gear icon.
# Press the Reset button and then press the icon that has a chip with a SD being pointed at a green arrow, and then press Reset again.
# Don't worry if any bad block is there, as this is normal
# You can also click the icon that has a chip with a SD being pointed at a red arrow, press the power button 1 time and then press Reset. This will recover a brick from the NAND since it can be bricked sometimes from something done wrong.
# Then you can press the power button 2 (at the sd being pointed at a red arrow) / 3 (at the sd being pointed at a green arrow) times to go to the arrow. Press the Reset Button and then press the Reset button or press the Power Button 1 time to go to The Homebrew Channel.

ABOVE DOESN'T WORK FOR DOLPHIN