Boot1
| This is an old revision of this page, as edited by Bushing (talk | contribs) at 11:35, 3 May 2009. It may differ significantly from the current revision. |
boot1 error codes
boot1 will flash error codes on the 8-bit debug port if a problem is encountered loading boot2 from the NAND flash.
| Error code | Notes |
|---|---|
| 4 | Misc error (valid blockmap not found) |
| 5 | Header error (length is not 0x20, or offset to data start is > 0x20000, or data start is not aligned to 64-byte boundary |
| 8 | RSA signature failure |
| 9 | Wrong key (CP used to sign ticket, etc) |
| 10 | EEPROM error (failure reading data from EEPROM) |
| 11 | Wrong ticket (not for boot2) |