Hardware/SD Host Controller
< Hardware
Jump to navigation
Jump to search
| This is an old revision of this page, as edited by Marcan (talk | contribs) at 19:49, 10 March 2009. It may differ significantly from the current revision. |
| SD Host Controller | |
| Access | |
|---|---|
| Broadway | None |
| Starlet | Full |
| Registers | |
| Base | 0x0d070000 |
| Length | 0x200 |
| Access size | 32 bits |
| Byte order | Reversed Little Endian |
| IRQs | |
| Hollywood | 7 |
General
The SD Host controller is just a standard SD host controller. You can get a simplified specification which is detailed enough to implement everything you need to access SD cards from the SD Association. Both the BSD (e.g. OpenBSD) and the Linux kernel come with an implementation.