Changes

Jump to navigation Jump to search
m
no edit summary
| hwdirq = 0,10,11,17,30,31,...{{check}}
}}
The Hollywood chipset includes a large register area including many miscellaneous controls. Some of these registers can be accessed by the powerPCPowerPC. Address bit 23 (0x00800000) controls the permission: if it is set, then the registers are accessed with Starlet permission (full access). If it is clear, only the PPC subset of the registers is visible. From the PPC, the state of this bit is irrelevant, which suggests that it is forced to zero internally in one of the buses.
See also the MINI source code, especially [http://gitweb.bootmii.org/?a=viewblob&p=mini&h=354386107f79891ad3d37cc84ced4a32d3cbca76&hb.git;a=4a13e2d20752cd8e5996161f73b8a438bca4ae6c&blob;f=hollywood.h hollywood.h].
== Register list ==
{{rld|0x0d800010|32|HW_TIMER|[[Hardware/Starlet Timer|Starlet Timer]]|drs=2}}
{{rld|0x0d800014|32|HW_ALARM}}
{{rld|0x0d800018|32|HW_PPCSPEEDHW_VI1CFG|0x4041974 for GCVI-configuration related, 0x4041970 for Wiiunused? }}{{checkrla|0x0d80001C|32|HW_VIDIM|Dims the video output}}{{rla|0x0d800024|32|HW_VISOLID|Sets the video output to a solid color}}{{rld|0x0d800030|32|HW_PPCIRQFLAG|[[Hardware/Hollywood IRQs|Hollywood IRQ controller]]|drs=412}}
{{rld|0x0d800034|32|HW_PPCIRQMASK}}
{{rld|0x0d800038|32|HW_ARMIRQFLAG}}
{{rld|0x0d80003c|32|HW_ARMIRQMASK}}
{{rld|0x0d800040|32|HW_ARMFIQMASK}}{{rld|0x0d800044|32|HW_IOPINTPPC}}{{rld|0x0d800048|32|HW_WDGINTSTS}}{{rld|0x0d80004c|32|HW_WDGCFG}}{{rld|0x0d800050|32|HW_DMAADRINTSTS}}{{rld|0x0d800054|32|HW_CPUADRINTSTS}}{{rld|0x0d800058|32|HW_DBGINTSTS}}{{rld|0x0d80005c|32|HW_DBGINTEN}}{{rla|0x0d800060|32|HW_MEMIRRHW_SRNPROT|Memory Probably bus control / ; includes the SRAM bank swap{{check}}}}{{rld|0x0d800064|32|HW_AHBPROT|Access control for the PPC to access devices on the AHB("HW_BUSPROT")}}{{rla|0x0d800070|32|HW_EXICTRLHW_AIPPROT|[[Hardware/EXI|EXI]] PPC enable / control / other ; probably related to Flipper interface compatibility}}{{rla|0x0d800074|32|HW_AIPIOCTRL|Probably related to Flipper interface compatibility/bus control}}{{checkrld|0x0d800080|32|HW_USBDBG0|USB-related, unused?|drs=4}}{{rld|0x0d800084|32|HW_USBDBG1}}{{rld|0x0d800088|32|HW_USBFRCRST}}{{rld|0x0d8000740x0d80008c|32|HW_DDRCTRL_ADDRHW_USBIOTEST}}{{rld|0x0d800090|32|[[Hardware/DDR ControlHW_ELA_REG_ADDR|DDR Control]]Unknown ("embedded logic-analyzer?!")|drs=24}}{{rld|0x0d800094|32|HW_ELA_REG_DATA}}{{rld|0x0d800098|32|HW_MEMTSTN}}{{rld|0x0d8000760x0d80009c|32|HW_DDRCTRL_VALHW_MEMTSTP}}
{{rld|0x0d8000c0|32|HW_GPIOB_OUT|[[Hardware/Hollywood GPIOs|Hollywood GPIOs]]|drs=16}}
{{rld|0x0d8000c4|32|HW_GPIOB_DIR}}
{{rld|0x0d8000d0|32|HW_GPIOB_INTFLAG}}
{{rld|0x0d8000d4|32|HW_GPIOB_INTMASK}}
{{rld|0x0d8000d8|32|HW_GPIOB_INMIRHW_GPIOB_STRAPS}}
{{rld|0x0d8000dc|32|HW_GPIO_ENABLE}}
{{rld|0x0d8000e0|32|HW_GPIO_OUT}}
{{rld|0x0d8000f0|32|HW_GPIO_INTFLAG}}
{{rld|0x0d8000f4|32|HW_GPIO_INTMASK}}
{{rld|0x0d8000f8|32|HW_GPIO_INMIRHW_GPIO_STRAPS}}
{{rld|0x0d8000fc|32|HW_GPIO_OWNER}}
{{rld|0x0d800100|32|HW_ARB_CFG_M0|AHB-related registers?|drs=18}}{{rld|0x0d800104|32|HW_ARB_CFG_M1}}{{rld|0x0d800108|32|HW_ARB_CFG_M2}}{{rld|0x0d80010c|32|HW_ARB_CFG_M3}}{{rld|0x0d800110|32|HW_ARB_CFG_M4}}{{rld|0x0d800114|32|HW_ARB_CFG_M5}}{{rld|0x0d800118|32|HW_ARB_CFG_M6}}{{rld|0x0d80011c|32|HW_ARB_CFG_M7}}{{rld|0x0d800120|32|HW_ARB_CFG_M8}}{{rld|0x0d800124|32|HW_ARB_CFG_M9}}{{rld|0x0d800130|32|HW_ARB_CFG_MC}}{{rld|0x0d800134|32|HW_ARB_CFG_MD}}{{rld|0x0d800138|32|HW_ARB_CFG_ME}}{{rld|0x0d80013c|32|HW_ARB_CFG_MF}}{{rld|0x0d800140|32|HW_ARB_CFG_CPU}}{{rld|0x0d800144|32|HW_ARB_CFG_DMA}}{{rld|0x0d800148|32|HW_ARB_PCNTCFG}}{{rld|0x0d80014c|32|HW_ARB_PCNTSTS}}{{rla|0x0d800180|32|HW_DIFLAGSHW_COMPAT|Some DI stuff and boot code and {{check}}}}{{rld|0x0d800184|32|HW_RESET_AHB|}}{{rld|0x0d800188|32|HW_SPARE0|?}}{{rla|0x0d80018c|32|HW_BOOT0|Maps (ACR_SPARE1) Controls boot0 mapping? {{check}}}}{{rla|0x0d800190|32|HW_CLOCKS|clock stuff?}}
{{rla|0x0d800194|32|HW_RESETS|System resets / power{{check}}}}
{{rld|0x0d800198|32|HW_IFPOWER|set to 0xFFFFFF when Wii wakes up ("interfaces")}}{{rld|0x0d80019c|32|HW_PLLDR|PLL/Clock configuration (?)|drs=12}}{{rla|0x0d8001b0|32|HW_PLLSYS}}{{rla|0x0d8001b4|32|HW_CLOCKSHW_PLLSYSEXT}}{{checkrld|0x0d8001b8|32|HW_PLLDSK}}{{rld|0x0d8001bc|32|ClockingHW_PLLDDR}}{{checkrld|0x0d8001c0|32|HW_PLLDDREXT}}{{rld|0x0d8001c4|32|HW_PLLVI}}{{rla|0x0d8001c8|32|HW_PLLVIEXT}}{{rld|0x0d8001cc|32|HW_PLLAI}}{{rla|0x0d8001d0|32|HW_PLLAIEXT}}{{rld|0x0d8001d4|32|HW_PLLUSB}}{{rla|0x0d8001d8|32|HW_PLLUSBEXT}}{{rld|0x0d8001dc|32|HW_IOPWRCTRL|set to 0xFFFFFFF when Wii wakes up ("subsystems")}}{{rld|0x0d8001e0|32|HW_IOSTRCTRL0|More clock registers?|drs=3}}{{rld|0x0d8001e4|32|HW_IOSTRCTRL1}}{{rld|0x0d8001e8|32|HW_CLKSTRCTRL}}
{{rld|0x0d8001ec|32|HW_OTPCMD|[[Hardware/OTP|OTP]]|drs=2}}
{{rld|0x0d8001f0|32|HW_OTPDATA}}
{{rld|0x0d8001f4|32|HW_DBGCLK|Debug registers|drs=4}}{{rld|0x0d8001f8|32|HW_OBSCLKOCTRL}}{{rld|0x0d8001fc|32|HW_OBSCLKICTRL}}{{rld|0x0d800200|32|HW_DBGPORT}}{{rld|0x0d800204|32|HW_SICLKDIV|SI-related, unused?|drs=4}}{{rld|0x0d800208|32|HW_SICTRL}}{{rld|0x0d80020c|32|HW_SIDATA}}{{rld|0x0d800210|32|HW_SIINT}}{{rla|0x0d800214|32|HW_VERSION|Hollywood version}}
{{rld|0x0d8b420a|16|MEM_PROT|MEM2 protection enable}}
{{rld|0x0d8b420c|16|MEM_PROT_START|MEM2 protection low address (upper 16 bits)}}
== General Registers ==
{{reg32 | HW_VIDIM | addr=0x0d80001c | hifields = 1 | lofields = 5 ||16 ||? || |||8 |1 |1 |3 |3 ||? |R/W|R/W|R/W |R/W|| |E | |Y |C ||}}This register controls dimming of the video output.{{regdesc|E|Turns Dimming on/off|Y|Amount to dim luma component (0-7)|C|Amount to dim chroma components (0-7)}} {{reg32 | HW_VISOLID | addr = 0x0d800024 | hifields = 2 | lofields = 3 ||8 |8 ||R/W |R/W ||U |V |||8 |7 |1||R/W |? |R/W||Y | |E ||}}This register controls the solid color for VI.{{regdesc|U|U component|V|V component|Y|Luma component|E|Turns solid colour on/off}} {{reg32 | HW_SRNPROT | addr = 0x0d800060 | hifields = 1 | lofields = 8 ||16 ||? || |||9 |1 |1 |1 |1 |1 |1 |1 ||? |R/W|R/W|R/W|R/W|R/W|R/W|R/W|| |H |SM |U4 |U3 |C |B |A ||}}This register controls seems to control visibility of various devices or features. The value of the register during normal operation seems to depend on Hollywood revision.  * In boot1c, set to 0x47 if HWVER (in HW_VERSION) is 0 - otherwise, set to 0x7.* When BC is booting, set to 0x67 if HWVER is 0 - otherwise set to 0x27  It seems like bits 31-7 cannot be read or written to? {{check}}{{regdesc|H|Set [by boot1, BC, others] if HWVER in HW_VERSION is 0|SM|Enables the SRAM mirror at 0xfffe0000 when set|U4|Unknown|U3|Set/cleared by syscall 0x54 in IOS58; maybe related to HW_AHBPROT|C|Explicitly set by boot0/boot1 before using NAND/AES/SHA|B|Explicitly set by boot0/boot1 before using NAND/AES/SHA|A|Explicitly set by boot0/boot1 before using NAND/AES/SHA}} {{reg32 | HW_AIPPROT | addr = 0x0d800214 0x0d800070 | hifields = 1 | lofields = 3 4 |
|16 |
|U ? |
| ||
|811|4 1 |4 3|1 ||U? |R /W|?|R /W || |DI | |VERHIENAHBIOPI |VERLO|
}}
This register contains controls at least the hardware revision of the Hollywood chipsetcurrent EXI status. It's probably related to bus control/GC compatibility.
{{regdesc
|VERHIDI|Versionunknown, used with DI-only syscalls 52 and 53, and appears to always be cleared{{check}}|VERLOENAHBIOPI|Revision"Enables the EXI bus." This bit is named in IOSv3. It's likely this is related to more than EXI.
}}
{{reg32 | HW_EXICTRL HW_AIPIOCTRL | addr = 0x0d800070 0x0d800074 | hifields = 1 | lofields = 2 |
|16 |
|? |
| ||
|15|1 |
|? |R/W ? || |EXI ENAHBIOMEM ||
}}
This register controls at least the current EXI statusis probably related to bus control/GC compatibility.
{{regdesc
|EXIENAHBIOMEM|enable EXI busThis bit is named in IOSv3.
}}
 {{reg32 | HW_DIFLAGS HW_COMPAT| addr = 0x0d800180 | hifields = 3 4 | lofields = 1 5 ||11 10|1 |1 |4 ||? |R/W |R/W |? || |DVDVIDEO|PPCBOOT| |||11 |1 |2 |1 |1||? |? |? |R/W |?|| |B4| |B1 | ||}}This register seems to control some aspects of the PowerPC booting and some DI flags.{{check}}{{regdesc|DVDVIDEO|Disables{{check}} DVD video support when set|PPCBOOT| needs to be set to allow the PowerPC to read the boot stub.|B4| Potentially related to the IOSTRCTRL registers?|B1| when clear, disables bit 14 in the PPC IRQ flags}} {{reg32 | HW_BOOT0 | addr = 0x0d80018c | hifields = 1 | lofields = 9 |
|16 |
|? || |||1|2 |1 |1 |1 |6 |1 |2 |1 ||?|R/W |R/W |R/W |R/W|? |R/W|? |R/W|| |DSKPLLSRC|BOOT0|B11 |B10| |A3 | |A0 ||
}}
This register seems to control some aspects of at least controls the powerpc booting boot0 memory mapping and some di flagsDSK PLL source.{{check}}
{{regdesc
|PPCBOOTBOOT0|needs Disable boot0 mapping to be either x'fffe_0000 or x'ffff_0000 depending on HW_MEMMIRR|DSKPLLSRC|According to STM, setting this to 00 "puts DSKPLL back to external reference"|B11|Explicitly set to allow by the powerpc to read [IOS58] kernel on boot|B10|Explicitly set by the [IOS58] kernel on boot stub.|A3|AHB-related? - polled on AHB flush? Related to bit 16 in 0x0d800188?|A0|AHB-related? - polled on AHB flush? Related to bit 16 in 0x0d800188?
}}
{{reg32 | HW_BOOT0 HW_CLOCKS | addr = 0x0d80018c 0x0d800190 | hifields = 1 | lofields = 3 |
|16 |
|? |
| ||
|3 14 |1|1 |12 ||?|R/W|R/W | ? || |BOOT0SPEED| FX|
}}
This register at least control the boot0 memory mappingis involved in some sort of clocking.
{{regdesc
|BOOT0FX|Disable boot0 mapping Unknown, but IOS calls this "FX".|SPEED|Sets the Hollywood clock to either x'fffe_0000 243MHz when 0 (Wii mode) or x'ffff_0000 depending on HW_MEMMIRR162MHz when 1 (GC mode)
}}
{{reg32 | HW_RESETS | addr = 0x0d800194 | hifields = 12 | lofields = 16 |
|5 |1 |1 |1 |1 |1 |1 |1 |1 |1 |1 |1 ||U |R/W |R/W |R/W |R/W |R/W |R/W |R/W |R/W |R/W |R/W |R/W || |A NLCKB_EDRAM|B RSTB_EDRAM|HANGRSTB_AHB|D RSTB_IOP|E RSTB_DSP|F RSTB_VI1|G RSTB_VI|DDR2RSTB_IOPI|I RSTB_IOMEM|DI2 RSTB_IODI|DDR1RSTB_IOEXI|||1 |1 |1 |1 |1 |1 |1 |1 |1 |1 |1 |1 |1 |1 |1 |1 ||R/W |R/W |R/W |R/W |R/W |R/W |R/W |R/W |R/W |R/W |R/W |R/W |R/W |R/W |R/W |R/W ||L RSTB_IOSI|M RSTB_AI_I2S3|N RSTB_GFX|O RSTB_GFXTCPE|P RSTB_MEM|DI RSTB_DIRSTB|R RSTB_PI|S RSTB_MEMRSTB|T NLCKB_SYSPLL|U RSTB_SYSPLL|PPC1SRSTB_CPU|PPC2RSTB_CPU|V RSTB_DSKPLL|SYS3RSTB_MEMRSTB|SYS2CRSTB|SYS RSTBINB|
}}
This register seems to contain the RESET control bits for several parts of the system, and possibly power-on stuff too. Reset/off = 0, run/on = 1.
{{regdesc
|HANGNLCKB_EDRAM|System Unlock external DRAM reset without recovery? |RSTB_EDRAM| External DRAM reset|RSTB_AHB| ARM AHB reset. Kills DI, sets slot LED on, hangs starlet...|DDR2RSTB_IOP|seems to be related to the GDDR3 memoryIOP/Starlet reset|DI2RSTB_VI1|DI VI1 reset 2?|DDR1RSTB_VI| Video Interface reset|RSTB_IOPI| [[Hardware/Processor_Interface|seems to be related to the GDDR3 memoryProcessor Interface IO]] reset|PRSTB_IOMEM|If cleared, kills EXI-based starlet experimental proxy.[[Hardware/Memory_Interface|MEM IO]] reset|DIRSTB_IODI|DI Disk Interface IO reset|URSTB_IOEXI|If cleared, kills EXI-based starlet experimental proxy.IO reset|PPC1RSTB_IOSI|PowerPC Reset 1 (release first)SI IO reset|PPC2RSTB_AI_I2S3|PowerPC Reset 2 (release second)Audio interface I2S3 reset|SYS3RSTB_GFX|System GFX reset 3. Also seems to reboot system.?|RSTB_GFXTCPE| GFX TCPE?|SYS2RSTB_MEM| [[Hardware/Memory_Interface|System MEM]] reset 2. Also seems to reboot systemIf cleared, kills EXI-based starlet experimental proxy.|SYSRSTB_DIRSTB|System Disk Interface reset. Set to zero to reboot system.B
}}
 
 
{{regdesc
|NLCKB_SYSPLL| Unlock SYSPLL reset?
|RSTB_SYSPLL| SYSPLL reset. If cleared, kills EXI-based starlet experimental proxy.
|SRSTB_CPU| PowerPC SRESET (release first)
|RSTB_CPU| PowerPC HRESET (release second)
|RSTB_DSKPLL| DSKPLL reset. Is cleared by IOS before modifying 1b8, and set again afterwards
|RSTB_MEMRSTB| MEM reset B. Also seems to reboot system.
|CRSTB| CRST? Also seems to reboot system.
|RSTBINB| System reset. Set to zero to reboot system.
}}
 
{{reg32 | HW_PLLSYS | addr = 0x0d8001b0 | hifields = 3 | lofields = 1 |
|5 |9 |2|
|?|R/W?| ? |
||clk_0|||
|16 |
|? |
| ||
}}
This register is involved in some sort of clocking.
{{regdesc
|clk_0|Unknown, but IOS calls this "clk_0".
}}
 
{{reg32 | HW_PLLSYSEXT | addr = 0x0d8001b4 | hifields = 1 | lofields = 2 |
|16 |
|? |
| ||
|7 |9 |
||R/W?|
||CPUCLK||
}}
This register is involved in some sort of clocking.
{{regdesc
|CPUCLK|IOS calls this "clk_1". 100J calls this "CPUCLK". This is probably the bus speed. Bit 8 is never set? <br>
 
243Mhz - 0x10<br>
216Mhz - 0x12<br>
194Mhz - 0x14<br>
176Mhz - 0x16<br>
162Mhz - 0x18<br>
149Mhz - 0x1a<br>
138Mhz - 0x1c<br>
129Mhz - 0x1e<br>
121Mhz - 0x20<br>
114Mhz - 0x22<br>
108Mhz - 0x24
}}
 
{{reg32 | HW_PLLVIEXT | addr = 0x0d8001c8 | hifields = 3 | lofields = 1 |
|1 |1 | 14|
|R/W? |R/W?| ? |
|A |B | ||
|16 |
|? |
| ||
}}
Probably related to VI clocking.
{{regdesc
|A|Related to VI PLL initialization?
|B|Related to VI PLL initialization?
}}
 
 
 
{{reg32 | HW_PLLAIEXT | addr = 0x0d8001d0 | hifields = 3 | lofields = 1 |
|1 |1 | 14|
|R/W? |R/W?| ? |
|A |B | ||
|16 |
|? |
| ||
}}
Probably related to AI clocking.
{{regdesc
|A|Related to AI PLL initialization?
|B|Related to AI PLL initialization?
}}
 
 
{{reg32 | HW_PLLUSBEXT | addr = 0x0d8001d8 | hifields = 3 | lofields = 1 |
|1 |1 | 14|
|R/W? |R/W?| ? |
|A |B | ||
|16 |
|? |
| ||
}}
Probably related to USB clocking.
{{regdesc
|A|Related to USB PLL initialization?
|B|Related to USB PLL initialization?
}}
 
{{reg32 | HW_VERSION | addr = 0x0d800214 | hifields = 1 | lofields = 3 |
|16 |
|U |
| ||
|8|4 |4 |
|U|R |R |
| |HWVER|HWREV|
}}
This register contains the hardware revision of the Hollywood chipset. Observed values:
 
* Hollywood ES1.x - 0x00 to 0x0f (?)<br>
* Hollywood ES2.0 - 0x10<br>
* Hollywood ES2.1 - 0x11
 
{{regdesc
|HWVER|Hollywood Version
|HWREV|Hollywood Revision
}}
 
 
{{hwstub}}

Navigation menu