From WiiBrew
Jump to navigation Jump to search

Nice work, porting classics over to the wii :) djdynamite123 20.01.09

not a card file -error-

I already download it, download some roms place those on the sd/wiixl/software/card directory , and place the 5200.rom file into the apps/wiixl directory, but I can't launch any Atari 5200 game. -TunaLover

Hmmm... Are you able to successfully launch it via the Atari800 emulator (not on the Wii, on Windows, etc.)? When launching a 5200 game it will normally prompt you to select the type of cartridge it is (you will typically need to select between the 1 or 2 chip 5200 cartridge type). Once you have selected the cartridge type, you need to cold restart it. If this works for you via the standard Atari800 emulator (on Windows, etc.) and doesn't work w/ WiiXL please let me know what version of firmware you have and I will try to reproduce it. Thanks. --Raz0red 19:48, 8 February 2009 (UTC)
What I do step by step
-Start emulation
-Press HOME
-In Select System, I select Atari 5200
-Cartridge management,(insert cartridge) I tried with both 5200 types
-Cold start with +
-I got an Atari screen, then the blue screen say The Atari Computer has crashed. -TunaLover
P.D. Sadly I never have tried this emulator with another system.
Hmmm, that typically means that the 5200.rom file is not correctly installed. When you go into the emulator configuration screen, does it show a full path to the 5200.rom file? If so, that means it was able to find the ROM. The rom that I am using and I know works can be found via the following URL:
Make sure you unzip it.
--Raz0red 20:42, 8 February 2009 (UTC)
yes the 5200.rom file show up in the emulator configuration.
5200 rom: sd:/apps/wiixl/5200.rom
I downloaded the file from the atariage too he. Still getting the Atari Computer has
crashed screen
Hmmm, not quite sure what is happening then. Some games don't require a restart at all, just simply exiting out of the menu (via B button) starts the game. But, typically when that occurs you aren't prompted for the cartridge type. When you are prompted, and it is a 5200 cartridge you must select between the 1 and 2 chip type. If it is an Atari 800 cartridge it is going to be one of the other types.... You might also want to confirm that the System is set to Atari 5200 in the Select System menu after you select the cartridge. --Raz0red 21:09, 8 February 2009 (UTC)

I just need insert cartridge? or create something more, maybe the disk option?