Changes

80 bytes added ,  19:26, 28 October 2009
no edit summary
The XF registers are accessed by first writing an 8-bit number of 0x10 to the FIFO, then a 32 bit value whose lower 16 bits are the address, and the upper 16 bits are the number of addresses to write to - 1. Following is one or more 32 bit datas.
More info on the XF can be found [[Hardware/GX/Transform Unit|here]].
 
== GX Development ==
* [http://gxr.brickmii.com/Tutorial/ Incomplete tutorial]
1

edit