Hollywood
| This is an old revision of this page, as edited by Bushing (talk | contribs) at 08:30, 1 October 2011. It may differ significantly from the current revision. |
The graphics chip in the Wii is codenamed "Hollywood"; it bears the logos of NEC (who presumably manufactured the chip), ATI (who designed the GPU), and BroadOn (who designed the Starlet "I/O Bridge").
Its graphics capabilities are similar to that of the GameCube's Flipper, except running at a higher clock speed.
Its hardware is documented on the Hardware article and subpages.
Pinout
The Hollywood chip is 2 or 3 flip-chip dies bonded to a BGA substrate, with a 30 x 30 (or later, 28x28) grid of balls to connect it to the rest of the circuit. Most balls are connected to other layers by way of vias; some signals are routed completely on the top layer.
(Please help verify and complete this pinout with a continuity tester! This pinout is for the earlier 30x30 version of the Hollywood; the 28x28 package has a completely different pinout.)
| Balls | Function |
| A1 | ? |
| This article is a stub. You can help WiiBrew by expanding it. |