| base |
function |
offset |
description |
contents/example
|
| 0x0D800000 |
hollywood control |
0x400 bytes of control registers; these registers are mirrored every 0x400 bytes from 0x0D80000 to 0x0D805fff
|
| 0x0D800000 |
IPC |
|
reg 0: request pointer |
To make an IOS request, the physical address of an IOS command struct is written here by the Broadway. Then, Broadway sets bit 0 of IPC reg 1 to indicate a request is ready.
|
| 0x0D800004 |
IPC |
|
reg 1: semaphore flags |
Broadway sets bits here as "doorbells" to indicate status; Starlet responds by setting flags here.
|
| 0x0D800008 |
IPC |
|
reg 2: Reply pointer |
When an IOS request has completed, IOS will modify the original command struct passed in IPC reg 0, copy that pointer to reg 2, then set reg 1 to 0x14 to indicate a reply is ready.
|
| 0x0D800010 |
timer (core clock divided by 128)
|
| 0x0D800014 |
alarm (interrupt 0 is fired when the timer reaches this value)
|
| 0x0D800030 |
something related to interrupts; typical value is 0x854DA94F. Pressing the RESET button will set the 0x20000 bit.
|
| 0x0D800034 |
???
|
| 0x0D800038 |
active interrupts (write 1 to clear). Pressing the RESET button will set the 0x20000 bit (interrupt 18). Pressing the POWER button will set the 0x800 bit (interrupt 11).
|
| 0x0D80003C |
enabled interrupts |
|
|
clear 0x40000 for legacy di
|
| 0x0D800060 |
???
|
| 0x0D800070 |
??? |
|
|
set 0x10 for legacy DI; 0x1 to allow write to exi boot buffer
|
| 0x0D8001EC |
OTP |
|
|
OTP read address (addresses run from 0x80000000..0x8000001F)
|
|
|
|
|
0x80000000 - 0x80000004 stores 20 bytes boot1 SHA-1 hash
|
|
|
|
|
0x80000005 - 0x80000008 common key
|
|
|
|
|
0x80000009 NG id
|
|
|
|
|
0x8000000a - 0x80000010 NG private
|
|
|
|
|
0x80000011 - 0x80000015 NAND HMAC
|
|
|
|
|
0x80000016 - 0x80000019 NAND AES
|
|
|
|
|
0x8000001A - 0x8000001D RNG key
|
| 0x0D8001F0 |
OTP |
|
|
OTP data
|
| 0x0D800214 |
??? |
|
|
Register is read 223 times while booting boot0 and boot1. Never written by boot0 or boot1.
|
| 0x0D800224 - 03FF |
|
|
unused
|
| 0x0D806800 |
EXI
|
| | |
0x40 |
ppc boot buffer
|
| 0x0D8B4000 |
AMBA AHB registers |
|
| 0x0D8B4000 |
???
|
| 0x0D8B4002 |
???
|
| 0x0D8B4004 |
???
|
| 0x0D8B4006 |
???
|
| 0x0D8B4008 |
???
|
| 0x0D8B400A |
???
|
| 0x0D8B400C |
???
|
| 0x0D8B400E |
???
|
| 0x0D8B4026 |
???
|
| 0x0D8B4074 |
???
|
| 0x0D8B4076 |
???
|
| 0x0D8B4228 |
|
|
AHB command |
AHB memory flush command. Typical values: 1, 2, 4, 8, 15
|
| 0x0D8B422a |
|
|
AHB acknowlegde |
If AHB memory flush acknowledge, will be set to the command value.
|