4
edits
Changes
no edit summary
Line 199:
Line 199:
When I use WiiLoad, it fails to transfer the file properly about 80% of the time. The progress bar goes up normally to some random point and then stops. Next the Wii shows the failed to receive file dialog box. WiiLoad says failure and "No Error". I've never seen any other network issues with my setup. The file that I'm transferring is about 8 Mega-bytes.
When I use WiiLoad, it fails to transfer the file properly about 80% of the time. The progress bar goes up normally to some random point and then stops. Next the Wii shows the failed to receive file dialog box. WiiLoad says failure and "No Error". I've never seen any other network issues with my setup. The file that I'm transferring is about 8 Mega-bytes.
<br>-- [[User:PaceMaker|PaceMaker]] 02:02, 31 July 2008 (CEST)
<br>-- [[User:PaceMaker|PaceMaker]] 02:02, 31 July 2008 (CEST)
+
+==Exception 0300 occurred!==
+While the Homebrew Channel Help page addresses this, the only possible solution offered is that bad directions were followed and to make sure you're following the most up-to-date installation instructions. I'm using the latest instructions, using the latest release and I'm still getting the Exception 0300 error. I have tried reformating the SD card multiple times, tried 3 different SD cards (512MB Kingston, 1GB Toshiba, 2GB Kindgston), all non-SDHC to no avail. There are no other cards plugged in to the Wii. I'm not sure what else to try. I had successfully installed HBC 7 in the past, but am doing a reinstall after I had to send it to Nintendo. If the code dump is of any use, I'd be more than happy to post it.
+[[User:tehnoir|tehnoir]] 6:21, 31 July 2008 (CEST)