Difference between revisions of "/shared2/sys/SYSCONF"
WiibrewBot (talk | contribs) m (Robot: Cosmetic changes) |
m (added tail bytes to description) |
||
| Line 2: | Line 2: | ||
The format of the file is fairly simple. Its size is 0x4000, and it contains a header that reads "SCv0", followed by the number of settings in the file (be u16), and then a list of offsets of each setting (be u16). Each setting (aka "Item") contains first a u8, specifying the type of the value, and the length of the name. The low-order 5 bits specify the length of the name, minus one. The high-order three bits specify the type of the value, as given by the table below. This is followed by a name, in ASCII, then a value. In the case of a BIGARRAY, the value begins with a be u16 specifying the length of the data, in bytes, which follows. In the case of a SMALLARRAY, the value begins with a u8 specifying the length. | The format of the file is fairly simple. Its size is 0x4000, and it contains a header that reads "SCv0", followed by the number of settings in the file (be u16), and then a list of offsets of each setting (be u16). Each setting (aka "Item") contains first a u8, specifying the type of the value, and the length of the name. The low-order 5 bits specify the length of the name, minus one. The high-order three bits specify the type of the value, as given by the table below. This is followed by a name, in ASCII, then a value. In the case of a BIGARRAY, the value begins with a be u16 specifying the length of the data, in bytes, which follows. In the case of a SMALLARRAY, the value begins with a u8 specifying the length. | ||
| + | |||
| + | Last 4 bytes of the file read "SCed". | ||
Conventions for adding or removing settings to the file are currently unknown, but shouldn't be too hard to determine--although that's not necessarily a useful function. | Conventions for adding or removing settings to the file are currently unknown, but shouldn't be too hard to determine--although that's not necessarily a useful function. | ||
Revision as of 01:22, 31 August 2012
The SYSCONF contains many Wii system settings.
The format of the file is fairly simple. Its size is 0x4000, and it contains a header that reads "SCv0", followed by the number of settings in the file (be u16), and then a list of offsets of each setting (be u16). Each setting (aka "Item") contains first a u8, specifying the type of the value, and the length of the name. The low-order 5 bits specify the length of the name, minus one. The high-order three bits specify the type of the value, as given by the table below. This is followed by a name, in ASCII, then a value. In the case of a BIGARRAY, the value begins with a be u16 specifying the length of the data, in bytes, which follows. In the case of a SMALLARRAY, the value begins with a u8 specifying the length.
Last 4 bytes of the file read "SCed".
Conventions for adding or removing settings to the file are currently unknown, but shouldn't be too hard to determine--although that's not necessarily a useful function.
Types
| Name | Value |
|---|---|
| BIGARRAY | 1 |
| SMALLARRAY | 2 |
| BYTE | 3 |
| SHORT | 4 |
| LONG | 5 |
| ??? | 6 |
| BOOL | 7 |
Some settings from the file:
BT Settings
| Name | Type | Size | Values | Description |
|---|---|---|---|---|
| BT.DINF | BIGARRAY | 0x460 | Bluetooth IDs | List of Wiimotes "synced" to the system |
| BT.CDIF | BIGARRAY | ? | ? | {{{5}}} |
| BT.SENS | LONG | 4 | 0-4? | Wiimote sensitivity setting |
| BT.BAR | BYTE | 1 | 0,1 | Sensor bar position (0:bottom) |
| BT.SPKV | BYTE | 1 | varies | Wiimote speaker volume |
| BT.MOT | BYTE | 1 | 0,1 | Wiimote motor on/off |
IPL Settings
| Name | Type | Size | Values | Description |
|---|---|---|---|---|
| IPL.IDL | SMALLARRAY | 2 | 0,1;0,1 | Shutdown mode and idle LED mode |
| IPL.UPT | BYTE | 1 | 2,? | Update Type |
| IPL.NIK | SMALLARRAY | 0x16 | utf16be string, including trailing NUL | Console Nickname |
| IPL.AR | BYTE | 1 | 0,1 | Aspect ratio setting. 0: 4:3 1: 16:9 |
| IPL.SSV | BYTE | 1 | 0,1 | Screen Saver off/on (burn-in reduction) |
| IPL.LNG | BYTE | 1 | 0,1 | System Language, see conf.c for some values |
| IPL.SADR | BIGARRAY | 0x1007 | lots | "Simple Address" Contains some region info |
| IPL.CB | LONG | 4 | ?? | Counter Bias -- difference between RTC and local time, in seconds |
| IPL.PC | SMALLARRAY | 0x50 | string | Parental Control password/setting |
| IPL.CD | BOOL | 1 | bool | Config Done flag -- has initial setup been performed? |
| IPL.CD2 | BOOL | 1 | bool | Config2 Done flag -- has network setup been performed? |
| IPL.EULA | BOOL | 1 | bool | EULA Done flag -- has EULA been acknowledged? |
| IPL.PGS | BYTE | 1 | 0,1 | Use Progressive Scan |
| IPL.E60 | BYTE | 1 | 0,1 | Use EuRGB60 (PAL6) |
| IPL.SND | BYTE | 1 | 0-2 | Sound setting |
| IPL.DH | BYTE | 1 | ? | Display Offset (Horiz) |
| IPL.INC | LONG | 4 | ? | "Installed Channel App Count" |
| IPL.ARN | ? | ? | ? | ? |
| IPL.FRC | LONG | 4 | ? | "Free Channel App Count" |
IPL.SADR values: Offset 0 is a Country Code and offset 1 seems to be a more localized region code.
Misc Settings
| Name | Type | Size | Values | Description |
|---|---|---|---|---|
| DEV.BTM | BYTE | 1 | 0 Production, 1 Development | Bootmode (used for NDEV) |
| DEV.VIM | ? | ? | ? | ? |
| DEV.CTC | ? | ? | ? | ? |
| DEV.DSM | BYTE | 1 | 0 Disabled, 1 Enabled, 2 Debug | Drive saving (used for NDEV) |
| DVD.CNF | ? | ? | ? | ? |
| WWW.RST | ? | ? | ? | WWW Restriction |
| NET.CNF | ? | ? | ? | ? |
| NET.CFG | ? | ? | ? | ? |
| NET.CTPC | LONG | 4 | ? | Net Content Restrictions ("Content Parental Control"?) |
| NET.WCFG | LONG | 4 | ? | WC24 Configuration flags |