5,579
edits
Changes
m
fixed redirect
Line 1:
Line 1:
−This page lists the known [[Starlet]] I/O registers. Much of this info comes from Segher & tmbinc's private notes.+
−== IO Memory ==
−
−{| border="1"
−! base !! function !! offset !! description !! contents/example
−|-
−||0x0D800000|| hollywood control || 0x400 bytes of control registers; these registers are mirrored every 0x400 bytes from 0x0D80000 to 0x0D805fff
−|-
−||0x0D800000||IPC|||| reg 0: request pointer || To make an IOS request, the physical address of an IOS command struct is written here by the Broadway. Then, Broadway sets bit 0 of IPC reg 1 to indicate a request is ready.
−|-
−||0x0D800004||IPC|||| reg 1: semaphore flags || Broadway sets bits here as "doorbells" to indicate status; Starlet responds by setting flags here.
−|-
−||0x0D800008||IPC||||reg 2: Reply pointer || When an IOS request has completed, IOS will modify the original command struct passed in IPC reg 0, copy that pointer to reg 2, then set reg 1 to 0x14 to indicate a reply is ready.
−|-
−||0x0D800010||timer (core clock divided by 128)
−|-
−||0x0D800014|| alarm (interrupt 0 is fired when the timer reaches this value)
−|-
−||0x0D800030|| something related to interrupts; typical value is 0x854DA94F. Pressing the RESET button will set the 0x20000 bit.
−|-
−||0x0D800034||???
−|-
−||0x0D800038||active interrupts (write 1 to clear). Pressing the RESET button will set the 0x20000 bit (interrupt 18). Pressing the POWER button will set the 0x800 bit (interrupt 11).
−|-
−||0x0D80003C||enabled interrupts|| || || clear 0x40000 for legacy di
−|-
−||0x0D800060||???
−|-
−||0x0D800070||??? || || || set 0x10 for legacy DI; 0x1 to allow write to exi boot buffer
−|-
−||0x0D8001EC||OTP || || || OTP read address (addresses run from 0x80000000..0x8000001F)
−|-
−|| || || || || 0x80000000 - 0x80000004 stores 20 bytes boot1 SHA-1 hash
−|-
−|| || || || || 0x80000005 - 0x80000008 common key
−|-
−|| || || || || 0x80000009 NG id
−|-
−|| || || || || 0x8000000a - 0x80000010 NG private
−|-
−|| || || || || 0x80000011 - 0x80000015 NAND HMAC
−|-
−|| || || || || 0x80000016 - 0x80000019 NAND AES
−|-
−|| || || || || 0x8000001A - 0x8000001D RNG key
−|-
−||0x0D8001F0||OTP || || || OTP data
−|-
−||0x0D800214||??? || || || Register is read 223 times while booting boot0 and boot1. Never written by boot0 or boot1.
−|-
−||0x0D800224 - 03FF || || || unused
−|-
−||0x0D806800||EXI
−|-
−|| | || 0x40 || ppc boot buffer
−|-
−|0x0D8B4000|| AMBA AHB registers ||
−|-
−||0x0D8B4000||???
−|-
−||0x0D8B4002||???
−|-
−||0x0D8B4004||???
−|-
−||0x0D8B4006||???
−|-
−||0x0D8B4008||???
−|-
−||0x0D8B400A||???
−|-
−||0x0D8B400C||???
−|-
−||0x0D8B400E||???
−|-
−||0x0D8B4026||???
−|-
−||0x0D8B4074||???
−|-
−||0x0D8B4076||???
−|-
−||0x0D8B4228|| || || AHB command || AHB memory flush command. Typical values: 1, 2, 4, 8, 15
−|-
−||0x0D8B422a|| || || AHB acknowlegde || If AHB memory flush acknowledge, will be set to the command value.
−|}
−[[Category:Wii_Hardware]]
#REDIRECT [[Hollywood/Registers]]
−