Difference between revisions of "Hardware/Hollywood Registers"
(some info on MEMIRR bits) |
(add some HW_BOOT0 bits) |
||
Line 162: | Line 162: | ||
}} | }} | ||
− | {{reg32 | HW_BOOT0 | addr = 0x0d80018c | hifields = 1 | lofields = | + | {{reg32 | HW_BOOT0 | addr = 0x0d80018c | hifields = 1 | lofields = 9 | |
|16 | | |16 | | ||
|? | | |? | | ||
| || | | || | ||
− | |1|2 |1 | + | |1|2 |1 |1 |1 |6 |1 |2 |1 | |
− | |?|R/W|R/W | + | |?|R/W |R/W |R/W |R/W|? |R/W|? |R/W| |
− | | | + | | |DSKPLLSRC|BOOT0|B11 |B10| |A3 | |A0 || |
}} | }} | ||
This register at least controls the boot0 memory mapping and DSK PLL source. | This register at least controls the boot0 memory mapping and DSK PLL source. | ||
Line 174: | Line 174: | ||
|BOOT0|Disable boot0 mapping to either x'fffe_0000 or x'ffff_0000 depending on HW_MEMMIRR | |BOOT0|Disable boot0 mapping to either x'fffe_0000 or x'ffff_0000 depending on HW_MEMMIRR | ||
|DSKPLLSRC|According to STM, setting this to 00 "puts DSKPLL back to external reference" | |DSKPLLSRC|According to STM, setting this to 00 "puts DSKPLL back to external reference" | ||
+ | |B11|Explicitly set by the [IOS58] kernel on boot | ||
+ | |B10|Explicitly set by the [IOS58] kernel on boot | ||
+ | |A3|AHB-related? - polled on AHB flush? Related to bit 16 in 0x0d800188? | ||
+ | |A0|AHB-related? - polled on AHB flush? Related to bit 16 in 0x0d800188? | ||
}} | }} | ||
Revision as of 23:27, 6 October 2019
Hollywood Registers | |
Access | |
---|---|
Broadway | Partial |
Starlet | Full |
Registers | |
Base | 0x0d800000 |
Length | 0x400 |
Access size | 32 bits |
Byte order | Big Endian |
IRQs | |
Broadway | 14 |
Hollywood | 0,10,11,17,30,31,...[check] |
The Hollywood chipset includes a large register area including many miscellaneous controls. Some of these registers can be accessed by the PowerPC. Address bit 23 (0x00800000) controls the permission: if it is set, then the registers are accessed with Starlet permission (full access). If it is clear, only the PPC subset of the registers is visible. From the PPC, the state of this bit is irrelevant, which suggests that it is forced to zero internally in one of the buses.
See also the MINI source code, especially hollywood.h.
Register list
Hollywood Registers | |||
---|---|---|---|
Address | Bits | Name | Description |
0x0d800000 | 32 | HW_IPC_PPCMSG | IPC |
0x0d800004 | 32 | HW_IPC_PPCCTRL | |
0x0d800008 | 32 | HW_IPC_ARMMSG | |
0x0d80000c | 32 | HW_IPC_ARMCTRL | |
0x0d800010 | 32 | HW_TIMER | Starlet Timer |
0x0d800014 | 32 | HW_ALARM | |
0x0d800018 | 32 | HW_PPCSPEED | PPC Speed Control |
0x0d80001C | 32 | HW_VIDIM | Dims the video output |
0x0d800024 | 32 | HW_VISOLID | Sets the video output to a solid color |
0x0d800030 | 32 | HW_PPCIRQFLAG | Hollywood IRQ controller |
0x0d800034 | 32 | HW_PPCIRQMASK | |
0x0d800038 | 32 | HW_ARMIRQFLAG | |
0x0d80003c | 32 | HW_ARMIRQMASK | |
0x0d800060 | 32 | HW_MEMIRR | Memory control / SRAM bank swap[check] |
0x0d800064 | 32 | HW_AHBPROT | Access control for the PPC to access devices on the AHB |
0x0d800070 | 32 | HW_EXICTRL | EXI PPC enable / control / other [check] |
0x0d800074 | 32 | HW_DDRCTRL_ADDR | DDR Control |
0x0d800076 | 32 | HW_DDRCTRL_VAL | |
0x0d8000c0 | 32 | HW_GPIOB_OUT | Hollywood GPIOs |
0x0d8000c4 | 32 | HW_GPIOB_DIR | |
0x0d8000c8 | 32 | HW_GPIOB_IN | |
0x0d8000cc | 32 | HW_GPIOB_INTLVL | |
0x0d8000d0 | 32 | HW_GPIOB_INTFLAG | |
0x0d8000d4 | 32 | HW_GPIOB_INTMASK | |
0x0d8000d8 | 32 | HW_GPIOB_INMIR | |
0x0d8000dc | 32 | HW_GPIO_ENABLE | |
0x0d8000e0 | 32 | HW_GPIO_OUT | |
0x0d8000e4 | 32 | HW_GPIO_DIR | |
0x0d8000e8 | 32 | HW_GPIO_IN | |
0x0d8000ec | 32 | HW_GPIO_INTLVL | |
0x0d8000f0 | 32 | HW_GPIO_INTFLAG | |
0x0d8000f4 | 32 | HW_GPIO_INTMASK | |
0x0d8000f8 | 32 | HW_GPIO_INMIR | |
0x0d8000fc | 32 | HW_GPIO_OWNER | |
0x0d800180 | 32 | HW_DIFLAGS | Some DI stuff and boot code and [check] |
0x0d800184 | 32 | HW_UNKFLAGS | [check] |
0x0d80018c | 32 | HW_BOOT0 | Maps boot0 [check] |
0x0d800190 | 32 | HW_CLOCKS | clock stuff? |
0x0d800194 | 32 | HW_RESETS | System resets / power[check] |
0x0d800198 | 32 | HW_IFPOWER | set to 0xFFFFFF when Wii wakes up ("interfaces") |
0x0d8001b0 | 32 | HW_ACRPLLSYS | ? |
0x0d8001b4 | 32 | HW_ACRPLLSYSEXT | Clocking? |
0x0d8001dc | 32 | HW_SSPOWER | set to 0xFFFFFFF when Wii wakes up ("subsystems") |
0x0d8001ec | 32 | HW_OTPCMD | OTP |
0x0d8001f0 | 32 | HW_OTPDATA | |
0x0d800214 | 32 | HW_VERSION | Hollywood version |
0x0d8b420a | 16 | MEM_PROT | MEM2 protection enable |
0x0d8b420c | 16 | MEM_PROT_START | MEM2 protection low address (upper 16 bits) |
0x0d8b420e | 16 | MEM_PROT_END | MEM2 protection high address (upper 16 bits |
0x0d8b4228 | 16 | MEM_FLUSHREQ | AHB flush request |
0x0d8b422a | 16 | MEM_FLUSHACK | AHB flush ack |
General Registers
HW_VERSION (0x0d800214) | ||||||||||||||||
31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | |
Access | U | |||||||||||||||
Field | ||||||||||||||||
15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | |
Access | U | R | R | |||||||||||||
Field | VERHI | VERLO |
This register contains the hardware revision of the Hollywood chipset.
Field | Description |
VERHI | Version |
VERLO | Revision |
HW_VIDIM (0x0d80001c) | ||||||||||||||||
31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | |
Access | ? | |||||||||||||||
Field | ||||||||||||||||
15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | |
Access | ? | R/W | R/W | R/W | R/W | |||||||||||
Field | E | Y | C |
This register controls dimming of the video output.
Field | Description |
E | Turns Dimming on/off |
Y | Amount to dim luma component (0-7) |
C | Amount to dim chroma components (0-7) |
HW_VISOLID (0x0d800024) | ||||||||||||||||
31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | |
Access | R/W | R/W | ||||||||||||||
Field | U | V | ||||||||||||||
15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | |
Access | R/W | ? | R/W | |||||||||||||
Field | Y | E |
This register controls the solid color for VI.
Field | Description |
U | U component |
V | V component |
Y | Luma component |
E | Turns solid colour on/off |
HW_MEMIRR (0x0d800060) | ||||||||||||||||
31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | |
Access | ? | |||||||||||||||
Field | ||||||||||||||||
15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | |
Access | ? | R/W | R/W | R/W | R/W | R/W | R/W | R/W | ||||||||
Field | H | SM | U4 | U3 | C | B | A |
This register controls seems to control various memory mappings? Bits 31-7 cannot be read or written to?
Field | Description |
H | Set [by boot1, BC, others] if VERHI in HW_VERSION is 0 |
SM | Enables the SRAM mirror at 0xfffe0000 when set |
U4 | Unknown |
U3 | Set/cleared by syscall 0x54 in IOS58; maybe related to HW_AHBPROT |
C | Explicitly set by boot0/boot1 before using NAND/AES/SHA |
B | Explicitly set by boot0/boot1 before using NAND/AES/SHA |
A | Explicitly set by boot0/boot1 before using NAND/AES/SHA |
HW_EXICTRL (0x0d800070) | ||||||||||||||||
31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | |
Access | ? | |||||||||||||||
Field | ||||||||||||||||
15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | |
Access | ? | R/W | ? | R/W | ||||||||||||
Field | DI | EXI |
This register controls at least the current EXI status.
Field | Description |
DI | unknown, used with DI-only syscalls 52 and 53, and appears to always be cleared[check] |
EXI | enable EXI bus |
HW_DIFLAGS (0x0d800180) | ||||||||||||||||
31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | |
Access | ? | R/W | R/W | ? | ||||||||||||
Field | DVDVIDEO | PPCBOOT | ||||||||||||||
15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | |
Access | ? | R/W | R/W | ? | ||||||||||||
Field | ? | ? |
This register seems to control some aspects of the PowerPC booting and some DI flags.[check]
Field | Description |
DVDVIDEO | Disables[check] DVD video support when set |
PPCBOOT | needs to be set to allow the PowerPC to read the boot stub. |
Bit 3 | unknown |
Bit 2 | when clear, disables bit 14 in the PPC IRQ flags |
HW_BOOT0 (0x0d80018c) | ||||||||||||||||
31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | |
Access | ? | |||||||||||||||
Field | ||||||||||||||||
15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | |
Access | ? | R/W | R/W | R/W | R/W | ? | R/W | ? | R/W | |||||||
Field | DSKPLLSRC | BOOT0 | B11 | B10 | A3 | A0 |
This register at least controls the boot0 memory mapping and DSK PLL source.
Field | Description |
BOOT0 | Disable boot0 mapping to either x'fffe_0000 or x'ffff_0000 depending on HW_MEMMIRR |
DSKPLLSRC | According to STM, setting this to 00 "puts DSKPLL back to external reference" |
B11 | Explicitly set by the [IOS58] kernel on boot |
B10 | Explicitly set by the [IOS58] kernel on boot |
A3 | AHB-related? - polled on AHB flush? Related to bit 16 in 0x0d800188? |
A0 | AHB-related? - polled on AHB flush? Related to bit 16 in 0x0d800188? |
HW_CLOCKS (0x0d800190) | ||||||||||||||||
31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | |
Access | ? | |||||||||||||||
Field | ||||||||||||||||
15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | |
Access | ? | R/W | R/W | |||||||||||||
Field | SPEED | FX |
This register is involved in some sort of clocking.
Field | Description |
FX | Unknown, but IOS calls this "FX". |
SPEED | Sets the Hollywood clock to 243MHz when 0 (Wii mode) or 162MHz when 1 (GC mode) |
HW_ACRPLLSYS (0x0d8001b0) | ||||||||||||||||
31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | |
Access | ? | R/W? | ? | |||||||||||||
Field | clk_0 | |||||||||||||||
15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | |
Access | ? | |||||||||||||||
Field |
This register is involved in some sort of clocking.
Field | Description |
clk_0 | Unknown, but IOS calls this "clk_0". |
HW_ACRPLLSYSEXT (0x0d8001b4) | ||||||||||||||||
31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | |
Access | ? | |||||||||||||||
Field | ||||||||||||||||
15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | |
Access | R/W? | |||||||||||||||
Field | clk_1 |
This register is involved in some sort of clocking.
Field | Description |
clk_1 | Unknown, but IOS calls this "clk_1". |
HW_RESETS (0x0d800194) | ||||||||||||||||
31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | |
Access | U | R/W | R/W | R/W | R/W | R/W | R/W | R/W | R/W | R/W | R/W | R/W | ||||
Field | NLCKB_EDRAM | RSTB_EDRAM | RSTB_AHB | RSTB_IOP | RSTB_DSP | RSTB_VI1 | RSTB_VI | RSTB_IOPI | RSTB_IOMEM | RSTB_IODI | RSTB_IOEXI | |||||
15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | |
Access | R/W | R/W | R/W | R/W | R/W | R/W | R/W | R/W | R/W | R/W | R/W | R/W | R/W | R/W | R/W | R/W |
Field | RSTB_IOSI | RSTB_AI_I2S3 | RSTB_GFX | RSTB_GFXTCPE | RSTB_MEM | RSTB_DIRSTB | RSTB_PI | RSTB_MEMRSTB | NLCKB_SYSPLL | RSTB_SYSPLL | SRSTB_CPU | RSTB_CPU | RSTB_DSKPLL | RSTB_MEMRSTB | CRSTB | RSTBINB |
This register seems to contain the RESET control bits for several parts of the system, and possibly power-on stuff too. Reset/off = 0, run/on = 1.
Field | Description |
NLCKB_EDRAM | Unlock external DRAM reset? |
RSTB_EDRAM | External DRAM reset |
RSTB_AHB | ARM AHB reset. Kills DI, sets slot LED on, hangs starlet... |
RSTB_IOP | IOP/Starlet reset |
RSTB_VI1 | VI1 reset? |
RSTB_VI | Video Interface reset |
RSTB_IOPI | Processor Interface IO reset |
RSTB_IOMEM | MEM IO reset |
RSTB_IODI | Disk Interface IO reset |
RSTB_IOEXI | EXI IO reset |
RSTB_IOSI | SI IO reset |
RSTB_AI_I2S3 | Audio interface I2S3 reset |
RSTB_GFX | GFX reset? |
RSTB_GFXTCPE | GFX TCPE? |
RSTB_MEM | MEM reset. If cleared, kills EXI-based starlet experimental proxy. |
RSTB_DIRSTB | Disk Interface reset B |
Field | Description |
NLCKB_SYSPLL | Unlock SYSPLL reset? |
RSTB_SYSPLL | SYSPLL reset. If cleared, kills EXI-based starlet experimental proxy. |
SRSTB_CPU | PowerPC SRESET (release first) |
RSTB_CPU | PowerPC HRESET (release second) |
RSTB_DSKPLL | DSKPLL reset. Is cleared by IOS before modifying 1b8, and set again afterwards |
RSTB_MEMRSTB | MEM reset B. Also seems to reboot system. |
CRSTB | CRST? Also seems to reboot system. |
RSTBINB | System reset. Set to zero to reboot system. |
This Hardware-related article is a stub. You can help WiiBrew by expanding it. |