Difference between revisions of "BootMii"
|Line 11:||Line 11:|
'''BootMii''' is a system designed by [[Team Twiizers]] to enable complete low-level control of the Wii. It allows the Wii to be controlled mere moments after the On button has been pressed, before any [[IOS]] has been loaded and before the [[NAND]] filesystem has been read
'''BootMii''' is a system designed by [[Team Twiizers]] to enable complete low-level control of the Wii. It allows the Wii to be controlled mere moments after the On button has been pressed, before any [[IOS]] has been loaded and before the [[NAND]] filesystem has been read.
== Architecture ==
== Architecture ==
Revision as of 06:04, 29 September 2009
Error creating thumbnail:
|This homebrew makes permanent changes to your Wii's flash memory (NAND) and should be used with caution.|
BootMii is a system designed by Team Twiizers to enable complete low-level control of the Wii. It allows the Wii to be controlled mere moments after the On button has been pressed, before any IOS has been loaded and before the NAND filesystem has been read.
BootMii is comprised by four pieces of software:
- Installer -- this is a simple ELF file which may be run using your favorite method (HBC, Twilight Hack, or any other exploit which can load standard executables). It checks your Wii to make sure it can safely be modified, saves some vital data for disaster recovery, and installs the rest of the components.
- Loader stub -- this is a small bit of ARM code which is injected into boot2, replacing Nintendo's internal ELF loader. When run, it looks to see if an SD card is inserted. If so, it tries to load and execute /bootmii/armboot.bin instead of boot2. Otherwise, it will fall back to loading boot2.
- mini -- this is a rudimentary replacement for IOS that is best suited for low-level recovery functions. Source code is available under GPLv2 here.
- BootMii (or bootmii-ppc) -- when mini runs, it looks for a file named /bootmii/ppcboot.elf on the SD card. If it exists, mini loads this executable into memory, boots up the Broadway (ppc) and executes that binary in parallel with mini. Source code is available under GPLv2 at (tbd).
Both mini and bootmii-ppc must be present in order to draw a user interface, because the Starlet cannot directly access the Video Interface.
BootMii allows anything from Recovery modes (creating a practically unbrickable Wii), to lazy access of the Homebrew Channel. For example, if you have corrupted the System Menu, you can use the AnyRegion Changer to install a System Menu 3.2. Unfortunately, all homebrew currently require an IOS, because libogc requires one. However, there is mini(a homebrew IOS-like software), which can be modified specifically for the program, ie, for better communication to the Linux kernel.
How it works
The BootMii Platform is a boot2 hack, which is loaded by boot1, which is loaded by boot0. boot0 is part of Hollywood and read-only. boot1, although stored on the NAND, is signed by a value in write-once memory and therefore cannot be changed. boot2, however, can be modified. This means it can be hacked, updated, and corrupted. BootMii hacks boot2, and allows running code directly from SD Card, before anything else is loaded. This has many advantages, such as making it very difficult to brick, and slowing Nintendo from blocking homebrew. Unfortunately, the only way we could completely stop Nintendo from blocking homebrew is by patching updates on-the-fly, or somehow preventing overwriting boot2. Wii Menu 4.2 Fixes the bug found in boot1 on older wiis and completely removes it if it is installed if you update from a previous version; Which means if you downgrade from 4.2 and it bricks you there is no getting it back.
BootMii should be compatible with most Wiis released before late 2008. Support for newer Wiis (with reduced functionality) will have to install BootMii as an IOS
For an SD card compatibility list, See SD Card Compatibility List.
BootMii will not require any special hardware. However, special hardware might help accomplish things that BootMii by itself cannot, such as hardware NAND write protection and isolation from the Nintendo software stack. No such hardware exists yet though.
The new boot1
Nintendo has released a new version of boot1, which disables Bootmii as a boot2 hack. Fortunately, Bootmii can also be modified to work as a replacement for IOS, or as a separate IOS (IOS254). See more at Hackmii. Since boot1 cannot be updated, all consoles already manufactured before this update are safe. About 10% of the consoles that ran the BootMii Checker tool have the new boot1.
|Video source: Marcan's early BootMii demo. The hardware mod in the video is unrelated to BootMii.|
- Improved the SD card compability
- Increased the backup/restore speed for some SD cards, but decreased it for others :P
- Fix GPIO input for all Wiis
- Wavebird support
- Fixed a silly bug where NAND backups were left as 0 byte files
- Keys are now saved to SD as /bootmii/keys.bin too
- SD card performance has been improved, decreasing the boot and the NAND backup / restore time
- backupmii accepts fragmented SD cards now, reformatting is not performed anymore. Old NAND dumps are still compatible.
- Introduced the INI variable “BOOTDELAY” to set the timeout for the auto boot feature
- First Public Release