RealWnD
| This is an old revision of this page, as edited by Pcfree (talk | contribs) at 03:22, 8 May 2009. It may differ significantly from the current revision. |
| A Real 1:1 Wii NAND Dumper | |
| General | |
|---|---|
| Author(s) | pcfree |
| Type | Utility |
| Version | 0.1 |
| License | GPL |
| Peripherals | |
   | |
Introduction
This program is a 1:1 Wii NAND Dumper based on YaWnD 0.3 with several improvements. All currently available Wii NAND Dumpers misunderstand the IOS_Read() returned error code -12 and cause dumped image file to be different from extracted image of external hardware programmer for de-soldered NAND chip.
After analyzing, the -12 code seems very likely to be ECC error but not simply to be bad block. And most pages with -12 return code might be unmanaged free block (ECC error due to erased but not programmed yet). Zeroing these pages is a bit dangerous. If it happens it's the very first time the ECC error occurred for a good page while dumping, zeros it might cause the dumped image useless.
Besides the -12 code, some people encounters -11 code and stop their dumping. I guess the -11 code might be NAND read timeout and NAND status error. Stopping dumping is not a good idea but zeroing it would be safe. I also provide extra Page Debug Dump for these -11 code for user to analyze it.
For whose NAND dump without -11 code, the RealWnD can help them make 100% 1:1 dump which is exact the same with hardware programmer dump.
Improvement
- Real 1:1 dump of NAND Flash by processing error code -11 and -12
- Greatly reduce dump time by opening files once instead of appending repeatedly
- Add log file for all error pages
- Change to new style FAT management code for easily compiling
- Add Debug Dump for -11 code or others for future analysis
Changelog
- v0.1 (08 May 2009) Initial release.