User:Hallowizer/Draft Homebrew setup/(str2hax)
< User:Hallowizer | Draft Homebrew setup
Jump to navigation
Jump to search
This is an old revision of this page, as edited by Hallowizer (talk | contribs) at 06:38, 29 September 2022. It may differ significantly from the current revision. |
- (OPTIONAL) If you would like to boot a payload from an SD card then simply format it as FAT32, place it the root of the SD card, and name it "boot.elf"
- Make sure you have an active internet connection on your Wii.
- Navigate to the settings menu on your Wii and select Internet then Connection Settings.
- Select the connection that you are currently using.
- Select Change settings and scroll to the right until you get to Auto-Obtain DNS.
- Select No then select Advanced Settings.
- Change the Primary DNS to 18.188.135.9.
- Select Confirm and then Save and run the mandatory connection test.
- When prompted, do NOT update. Depending on the console, you might brick from the update, and this type of brick requires a hardware modification to fix.
- Back out to the Internet panel and choose User Agreements. Select Yes to the question about the Wii Shop Channel/WiiConnect24.
- You will be taken to a screen telling you to review the User Agreements for the Wii. Select Next.
- If you see a pony on screen telling you to wait then you have done everything correctly. Do not press I ACCEPT or I DO NOT ACCEPT. The exploit takes 1-2 minutes (1:25 is usually how long mine takes), if it takes longer than 2 minutes then it probably failed. Just turn off your Wii and start again from step 9.